470448
13
Zoom out
Zoom in
Previous page
1/48
Next page
13
4. Using it for the first time
4.1 Charging the battery pack
– Important: the battery pack must be charged prior to initial use or after prolonged periods
without use.
– plug the charger into an electrical outlet with a voltage corresponding to the specications on
the charger. The green LED on the charger function display lights.
– Connect the charging plug to socket „E“ on the battery pack. The red LED „C“ on the func-
tion display of the battery pack lights red.
– Only charge the battery pack in a dry environment and at temperatures between 10 °C and
35 °C.
– The battery is fully charged when red LED „C“ on the function display of the battery pack is
off (approx. 4 hours). This is followed by a maintenance charge of the battery pack.
– Please note that the full capacity of the battery pack is only reached after several charge and
discharge cycles.
– The battery pack should be fully discharged and recharged at least twice a year to maintain
its full capacity.
– Do not cover the battery pack with blankets, pillows or similar objects while it is charging.
The battery pack will switch off if it is overheated.
- The heating pad cannot be used during charging.
4.2 Operating the battery-operated heating pad with the battery pack
– Remove the charger plug from the battery pack
– Connect the heating pad plug to connection D on the battery pack
– Select the required temperature setting with function key B.

Press function key B to select the temperature.
The fastest way to heat up the heating pad is to set the switch to the highest setting rst
(level 2). You can switch back to a lower temperature setting later as required.
We recommend the lowest temperature setting for extended use of the heating pad.

off = no LED on
minimum heat = 1 blue LED on (press once)
medium heat = 2 blue LEDs on (press twice)
maximum heat = 3 blue LEDs on (press three times)
4.5 Automatic switch-off
The battery-operated heating pad has an automatic switch-off function. It stops the heat ap-
prox. 90 minutes after switching on the heating pad. Function key C switches off at this point.
4.6 Battery pack charge status
When the battery is discharged, red LED „C“ on the function display on the battery pack lights.
The heating pad then no longer provides warmth. Charge the battery pack as described in 4.1.
Please note that the battery pack should be protected against extreme cold (under clothing
if applicable) to maintain its full efciency.
If all three blue LEDs on the battery pack function display are ashing, the heating pad is not
correctly connected to the battery pack or there is a fault. Check the connection. If the three
blue LEDs continue to ash, please send the battery-operated heating pad and the battery
pack for repair.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beurer HK 62 Mobil at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beurer HK 62 Mobil in the language / languages: English, German, French, Italian, Polish, Turkish, Spanish as an attachment in your email.

The manual is 2,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Beurer HK 62 Mobil

Beurer HK 62 Mobil User Manual - Dutch, Danish, Portuguese, Swedish, Norwegian - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info