470439
8
Zoom out
Zoom in
Previous page
1/32
Next page
8
Do not pull, twist or make any sharp kinks in the cables.
Do not stick pins or pointed objects into this heating pad.
This appliance may not be used by children unless the switch has been preset by a parent or a su-
pervisory person, or the child has been su ciently instructed in how to use this heating pad safely.
Children should be supervised to ensure that they do not use the heating pad as a toy.
This heating pad must be checked frequently for signs of wear or damage. If such signs are
present, or if the cables are damaged, or if this heating pad has been used incorrectly, it must be
taken to either the manufacturer or the dealer before further use.
Repairs may only be carried out by specially trained personnel or at an authorised repair work-
shop, as special tools are required. Incorrect repairs may cause considerable danger to the user.
Should you still have questions on using our appliances, please contact our customer service.
2. Proper Use
This heating pad is designed for warming the human body. It allows you to apply tar geted warmth.
Heat promotes the circulation and relaxes the muscles. This heating pad is not intended for use in
hospitals or for commercial applications. In particular, it may not be used on infants, small children,
persons insensitive to heat, helpless persons or animals.
To avoid soiling or damaging the heating pad, we recommend using a fabric cover, particularly when
applying essential oils and ointments.
When used for the fi rst time, the heating pad may start to smell of plastic but this will soon go away.
3. Operation
3.1 Safety
This heating pad has a SAFETY SYSTEM. This electronic sensor technology prevents the entire
surface of the heating pad from overheating by automatically switching o in the event of a fault. If
the safety system switches o the heating pad automatically as a result of a fault, the temperature
display on the switch is no longer illuminated even when the heating pad is switched on. Please
note that, after a fault has occurred, the back and neck heating pad can no longer be used for safety
reasons and must be sent to the service address indicated.
3.2 Putting into operation HK 25, 35, 63
First check that the switch is connected to the heating pad at the plug-in
connection. Plug the power cord into the mains outlet.
3.3 Selecting temperature
The fastest way to heat up the heating pad is to fi rst set the switch to the highest setting. A lower
setting can be selected later if required.
After switching on the heating pad, the setting starts fl ashing briefl y, while the heating pad conducts
a self-test. Then the setting remains illuminated continuously.
3.4 Temperature settings
Level: 0 O
1 Minimum heat
2 Medium heat
3 Maximum heat
3.5 Automatic switch-off function
The heating pad switches o automatically after approx. 90 minutes. The illuminated
temperature setting display then starts to fl ash. To switch on the heating pad again, fi rst
set to ‚0‘ and then after approximately 5 seconds select the desired temperature setting.
Switch o the heating pad (0) or pull the plug out of the mains socket if you are not
going to use the heating pad after the automatic switch-o .
90min
STOP
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beurer HK 40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beurer HK 40 in the language / languages: English, German, French, Italian, Polish, Turkish, Spanish as an attachment in your email.

The manual is 2,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Beurer HK 40

Beurer HK 40 User Manual - Dutch, Danish, Portuguese, Swedish, Norwegian - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info