715875

Beurer HK 37 To Go Manual

14
Zoom out
Zoom in
Previous page
1/72
Next page
14
– The flashing sequence of the white LED display on the powerbank indicates the charging status of the
powerbank when charging and running down:
1 x flash: 0 - 25%
2 x flash: 26 - 50%
3 x flash: 51 - 75%
4 x flash: 76 - 99%
Permanently lit up: 100%
– As soon as the LED display on the powerbank lights up permanently white, the powerbank is fully charged
(after approx. 4.5 hours from empty).
– The white LED display on the powerbank goes out shortly after the powerbank has been disconnected
from the USB charger.
– The powerbank should be charged at least once a year to retain its capacity.
– Do not cover the powerbank with covers, cushions or similar during the charging process in order to
prevent overheating.
– Only charge the powerbank in a dry environment and at normal room temperature.
4.3 Charging a smartphone via powerbank
The powerbank can be used for more than just operating
the heat pad – it can also be used to charge the battery of a
smartphone. To charge your smartphone using the power-
bank, proceed as follows:
• Connect the powerbank to your smartphone using the
original USB charging cable from your smartphone manu-
facturer.
4.4 Operating the heat pad
• Pull the heat pad over your head. Ensure that the drawstring (6) is positioned
at the top, facing the front. Ensure that the heating element is located at
your neck.
• To adjust the size, you can pull on the drawstring (6).
• Place the charged powerbank (4) into the built-in pocket (5) on the heat pad.
• Insert the connector plug of the heat pad's connecting cable (3) into the
connection socket on the powerbank. The LED display of the On/Off but-
ton (2) on the heat pad briefly lights up white three times. The heat pad is
now ready for use.
IMPORTANT
Ensure that the heat pad will not bunch up or become folded dur-
ing use.
4.5 Switching on
• Press the On/Off button (2) to switch on the heat pad (1). The LED display of the On/Off button lights up
green (minimum heat). The LED display of the powerbank (4) lights up or flashes white according to the
charge status of the powerbank.
• If you press the On/Off button again, the temperature setting will increase (medium heat). The LED display
of the On/Off button lights up yellow.
• If you press the On/Off button again, the heat pad switches to the maximum temperature setting (maximum
heat). The LED display of the On/Off button lights up red.
• If you press the On/Off button again, the heat pad switches off. The LED display of the
On/Off button goes out immediately and the LED display on the powerbank goes out after a few seconds.
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beurer HK 37 To Go at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beurer HK 37 To Go in the language / languages: English, German, French, Italian, Polish, Turkish, Spanish as an attachment in your email.

The manual is 5,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info