Manual Beurer GS 49 (page 8 of 56) (English, German, Dutch, French, Italian, Portuguese, Turkish, Spanish)

470169

Zoom out

Zoom in

1/56

3.1 Operation

If there is one, remove the plastic insulating strip by pulling it from the battery compartment lid of

the scale and the height calculator and remove the protective film from the batteries, then insert

them the correct way round. If the scale does not function, remove the batteries completely and

then replace them.

Your scale is equipped with a “low battery indicator”. If you operate the scale with

flat batteries, “Lo 2” will appear on the display and the scale will automatically

switch itself off. In this case, the batteries in the scale must be replaced

(2 x CR2032). If “Lo 1” appears in the display, the batteries of the height

calculator must be changed. (2 x AAA 1.5 V micro).

If the scale does not function, change the batteries. Change the height cal-

culator batteries if it does not beep when taking height measurements (ex-

ception: the height calculator does not beep when you hold it horizontally).

The empty, completely flat batteries should be disposed of by means of

specially designated collection boxes, recycling points or via electronics retailers. You are legally

required to dispose of the batteries.

Tip: You will find these symbols on batteries containing contaminants: Pb = batte-

ries contain lead, Cd = batteries contain cadmium, Hg = batteries contain mercury.

Please dispose of the device in accordance with the EC directive on old electric and

electronic devices 2002/96/EC – WEEE (“Waste Electrical and Electronic Equipment”).

If you have queries, please contact the appropriate local authorities.

3.2. Only measuring weight

Place the scale on an even, hard surface (no carpet);

a hard surface is crucial to accurate measurements.

Step carefully onto the scale, distributing your weight equally

across both legs. The scale begins to take measurements straight away. After

the display has flashed twice, the final measurement is displayed (Fig. 1). If you

step off the weighing area, the scale switches off after 10 seconds.

3.3 Calculating weight and BMI

– Stand still on the scale with equal weight distribution until your weight is displayed (Fig. 2). The scale

flashes twice to indicate that your weight has been measured.

– Position the height calculator on the middle of your head, with the thin end pointing forwards

and the button pointing upwards.

– Press the button on the height calculator once (do not keep the button pressed down).

It will then begin to beep (Fig. 3).

– Look straight ahead.

– Use the height calculator to find a horizontal position. Keep the thicker end on your head (Fig. 4).

– As soon as you have found a horizontal position, the beeping will stop.

Remain in this position for about 5 seconds. (Fig. 5)

– The scale beeps and signals that the height has been measured (Fig. 6).

The measurement has now been taken and you may put the pole aside.

– The scale alternately displays your weight, your BMI and your height.

Tip: The BMI can only be calculated if the weight has been correctly measured.

– The arrow functions on the right-hand edge of the display and the colour chart on the device

show which area the recorded BMI values fall into.

– You can now step off the scale. The scale switches off automatically after 10 seconds.

Fig. 1

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Beurer GS 49 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 1,21 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Beurer GS 49 Manual

Product: