Manual Beurer GS 46 (page 5 of 24) (English, German, Dutch, French, Italian, Portuguese, Turkish, Spanish)

470168

Zoom out

Zoom in

1/24

– On delivery the scale is set to the unit “kg”. A switch located on the back of the scale enables you

to change to “pound” and “stones” (lb, St).

– Please dispose of the appliance in accordance with the Directive 2002/96/EC on Waste

Electrical and Electronic Equipment (WEEE). In case of queries, please contact the munici-

pal authorities responsible for waste disposal in your area.

3. Use

This scale is used to determine the weight of human beings. The scale has a weighing range up to

150 kg (330 lbs). If the scale is loaded with a higher weight (>150 kg), „Err“ appears in the display.

3.1 Batteries

If present, pull the battery insulating strip off the battery com-

partment cover or remove the battery’s protective film and insert

the battery according to the polarity. If the scale fails to operate,

remove the battery completely and insert it again. Your scale is

equipped with a “replace battery” indicator. When the scale is

operated with a battery which is too weak, “Lo” appears in the display field and the scale auto-

matically switches off. The battery must be replaced in this case (4 x1,5 V, AAA, Mikro). The used,

completely drained standard and rechargeable batteries must be disposed of in specially marked

collection containers, at toxic waste collection points or electrical product retailers. You

are legally obligated to dispose of the batteries.

Note: Batteries containing pollutants are marked with the following symbols:

Pb = Battery contains lead, Cd = Battery contains cadmium, Hg = Battery contains

mercury.

3.2 Measuring weight

Place the scale on a firm level floor (no carpet); a firm floor covering is

required for correct measurement.

Audibly, briefly and firmly tap the scale with your foot to active the vibra-

tion sensor!

The entire display (Fig. 1) appears up to “0.0” (Fig. 2) as a self-test (vibration

on technology).

Now the scale is ready to measure your weight. Now step onto the scale.

Stand on the scale without moving about and distribute your weight evenly

on both legs. The scale immediately begins to measure your weight. After the

display flashes twice, the final measurement result appears on the display

(Fig. 3). The scale switches off approx. 10 seconds after you step down from

it. The measuring result remains visible during this time.

Make sure that you always switch on the scale first and wait for the display

“0.0” (Fig. 2) before stepping on.

If the scale detects an error during weighing, „ErrE“ appears in the display

(Fig. 4).

4 x AAA

Fig. 1

0000

Fig. 2

Fig. 4

0.0

Fig. 3

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Beurer GS 46 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 1,5 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Beurer GS 46 Manual

Product: