715964

Beurer GS 280 BMI Manual

10
Zoom out
Zoom in
Previous page
1/44
Next page
10
5. Initial use
Inserting the batteries (2 x 3V CR2032)
Please remove the battery insulating strips and/or position the batteries correctly with regards to
the polarity displayed in the battery compartment. If the scale fails to operate, remove the batteries
completely and reinsert them.
Changing the weight unit
The scale shows the values in kg. You can set the device to measure in kilograms ('kg'), pounds ('lb')
and stones ('st') using the button on the back of the device.
Setting up the scale
Set up the scale on a level and solid surface. A solid surface is a prerequisite for a correct
measurement.
6. Information
The measuring principle
The BMI is calculated using the height value entered and the measured weight value.
General tips
• If possible, always weigh yourself at the same time of day (preferably in the morning), after using
the toilet, on an empty stomach and unclothed, in order to achieve comparable results.
7. Weight measurement
Step onto the scale. Stand still with your weight distributed equally on both feet. The scale begins to
take measurements straight away. After flashing twice, the weight is established.
If you step off the weighing area, the scale switches off after a few seconds.
8. Weight and BMI display
Setting user data
The scale has 10 user memory spaces. You and, for example, the members of your family can save
and later access the following personal settings in the user memory spaces:
Sequence User data Parameters
1 Memory position P-0 to P-9
2 Body height 80 to 240 cm (2'-07" to 7'-10")
• Press the "SET" button until you have reached the desired memory space (P-0 – P-9). Confirm
using the "SET" button. First, the default height value will be displayed.
• Press the buttons
and to set your height. Keep the button pressed to scroll quickly (P-0 –
P-9).
• Finish entering data by pressing the "SET" button.
Please note: If you change your height setting at a later point in time, the saved
measurement (weight and BMI) in your user memory will be deleted.
Weighing yourself and calculating BMI
To weigh yourself and to calculate your personal body mass index:
• Using the "SET" button, select the user memory space where your settings have been saved. Your
saved height value will be displayed. The selected user memory flashes at the same time. The last
measurement (weight and BMI) is then displayed.
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beurer GS 280 BMI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beurer GS 280 BMI in the language / languages: English, German, French, Italian, Polish, Turkish, Spanish as an attachment in your email.

The manual is 1,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info