Manual Beurer GS 23 (page 7 of 36) (English, German, Dutch, French, Italian, Portuguese, Turkish, Spanish)

470155

Zoom out

Zoom in

1/36

4.3 Switching off the clock function

The clock function can also be switched off to extend the battery life.

Press „SET“ in standby mode for approx. 5 seconds. The time is no longer displayed.

To reactivate the time display, press „SET“ again in standby mode for approx. 5 seconds. A number

starts to blink in the display. Then proceed as described in 4.2. Switching on the time.

4.4 Change picture

Place the scale on a flat surface with the glass face down. Open the flap and change the picture.

The optimum picture size is 20 x 25 cm. If you wish to use a standard photo print, measure 20 x 25

cm and trim the photo to size.

Your photo will stay in position if you reverse the included original picture and glue your photo to the

grey back (e.g. using double-sided adhesive tape). The grey colour will also make it easy for you to

insert smaller pictures or a photo collage.

4.5 Wall mounting

The scale can be mounted on the wall with suitable screws.

Drill two holes horizontally side by side to fit the wall mount (16 cm) and screw in the screws until

the wall mount is fixed in position by the screw heads. Check that the scale is securely and safely

mounted.

4.6 Positioning scales

Fold out the foot until it is perpendicular to the scale. Place it on a flat surface and check that it is

securely positioned.

5. Measuring weight

Place the scale on a firm level floor (no carpet); a firm floor covering is

required for correct measurement. Audibly, briefly and firmly tap the scale

with your foot to active the vibration sensor!

The clock display changes and the complete display appears as a self-test

(Fig. 1) until it reaches „0.0“ (Fig. 2) is displayed.

Now the scale is ready to measure your weight. Now step onto the scale. Stand

still on the scale with your weight distributed evenly between both legs. The

scale immediately begins to measure your weight. Your measured weight is

displayed shortly after this (Fig 3).

The scale switches off 10 seconds after you step down from it. The result re-

mains visible for this time. If the clock function is activated, the scale automati-

cally switches back to displaying the time.

Make sure that you always switch on the scale first and wait for the display

„0.0“ (Fig. 2) before stepping on. Otherwise the display will show „Err“.

If the maximum load capacity of the scale (150 kg) is exceeded, the display will show „0-Ld“.

8888

0.0

Fig. 2

Fig. 3

Fig. 1

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Beurer GS 23 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 2,3 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Beurer GS 23 Manual

Product: