568649
16
Zoom out
Zoom in
Previous page
1/40
Next page
16 Beurer GL50 evo mg/dL
3
Setting the timer
You can set a timer on the blood glucose monitor. An acoustic signal sounds when the timer
elapses. To set a timer, proceed as follows:
1. Switch on the blood glucose monitor by briefly pressing and holding the scroll wheel.
2. Rotate the scroll wheel until the arrow is pointing towards “settings”, then press the scroll
wheel to confirm.
3. Rotate the scroll wheel until the arrow is pointing towards “timer, then press the scroll wheel.
4. Press the scroll wheel. Rotate the scroll wheel until the hour is marked, then press the scroll
wheel. Now set your desired timer hour by rotating the scroll wheel and press the scroll
wheel to confirm.
5. Use the same procedure to set the timer minute.
6. In order to start the timer, rotate the scroll wheel to “start” and press the scroll wheel.
4
Switch Bluetooth
®
on/o
You can switch on Bluetooth
®
on the blood glucose monitor. Data transfer with Bluetooth
®
is
only possible with the optinal Bluetooth
®
adapter.
1. Switch on the blood glucose monitor by briefly pressing and holding the scroll wheel.
2. Rotate the scroll wheel until the arrow is pointing towards “settings”, then press the scroll
wheel.
3. Rotate the scroll wheel until the arrow is pointing towards “bluetooth on/o”, then press
the scroll wheel.
4. Rotate the scroll wheel until the arrow is pointing towards “bluetooth on”, then press the
scroll wheel. Bluetooth
®
is now switched on.
5
Switching the acoustic signal on/o
On the blood glucose monitor, you can switch on the acoustic signal, switch o the acoustic
signal or set a result beep.
1. Switch on the blood glucose monitor by briefly pressing and holding the scroll wheel.
2. Rotate the scroll wheel until the arrow is pointing towards “settings”, then press the scroll
wheel.
3. Rotate the scroll wheel until the arrow is pointing towards “beep on/o”, then press the
scroll wheel.
4. Use the scroll wheel to select your desired setting (beep on, beep o or result beep) and
confirm by pressing the scroll wheel.
Note
The result beep will feedback the measurement value as beep signals.
Example: Measurement value 103
start signal
beepbeep
number 1
short beep
number 2
long beep (for 0)
number 3
3 x short beep
The beep signals will be repeated 2 times and can be interrupted by rotating the scroll wheel.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beurer GL50 mg dL evo at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beurer GL50 mg dL evo in the language / languages: English as an attachment in your email.

The manual is 1,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Beurer GL50 mg dL evo

Beurer GL50 mg dL evo User Manual - German - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info