533551
25
Zoom out
Zoom in
Previous page
1/40
Next page
Beurer GL40 mmol/L 25
5.4 Function check with control solution
The control solution is used for checking the whole blood sugar measuring system. This
enables you to determine whether the measuring device and the test strips are function-
ing correctly together and whether the test is performed correctly. It is very important that
you perform these tests using the control solution to ensure accurate measuring results.
Important
Never use a control solution from other manufacturers. You can only verify the proper
function of your measuring device using the Beurer GL40 control solution.
When is it recommended to perform a test using the control solution?
After opening a new test strip container.
If you suspect that the measuring device or the test strips could be defective.
If your blood sugar measurement values do not correspond to the way you are feeling.
If you have dropped the measuring device or it has been subjected to other mechani-
cal strain.
Every time you suspect that the blood sugar results may be incorrect.
It is sufficient to perform a single control solution test if the result is within the recom-
mended range.
Warning
Do not ingest the control solution. The control solution is only to be used for function tests
and is for external use only.
Note
Store the control solution tightly closed at a room temperature below 30°C. Do not
refrigerate.
Store the control solution out of reach of young children.
Do not store the control solution in the medicine cabinet. It may be mistaken for medi-
cine to be consumed.
The control solution can discolour your clothing. In this case, wash your clothing with
soap and water.
Carefully close the control solution bottle after each use.
Any control solution squeezed out in excess must not be sucked back into the bottle.
Preparations
Do not use the control solution once the expiry date has passed. Using control solu-
tion that is out-of-date may lead to incorrect function test results. The expiry date is lo-
cated on the bottle next to the hourglass symbol
.
The control solution can be kept for three months once the bottle is open. Make a note
of when this time will run out (date of opening + 3 months
) on the label. The shelf
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beurer GL40 mmol-L at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beurer GL40 mmol-L in the language / languages: English as an attachment in your email.

The manual is 2,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Beurer GL40 mmol-L

Beurer GL40 mmol-L User Manual - German - 40 pages

Beurer GL40 mmol-L User Manual - Dutch - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info