533551
22
Zoom out
Zoom in
Previous page
1/40
Next page
22 Beurer GL40 mmol/L
5.2 Measuring the blood sugar value
1 Hold the measuring device so that the display is facing you.
2 Insert a test strip, contacts first, into the unit. Ensure that the front side is facing you.
You can handle any part of the test strip with clean, dry hands.
3 The unit switches on automatically and shows the start display. As soon as the hand
and symbols are flashing, the unit is ready to perform measurements.
4 Hold the blood collection slit (at the point of the test strip)
against the blood droplet. Do not press the puncture site
(fingertip or other body part) against the test strip. The
blood must not be smeared. The blood is sucked into the
slit.
Warning: Hold the blood collection slit of the test strip against the blood droplet
until the slit is completely filled and you hear a beep. Withdrawing the test strip from
the blood droplet before the beep may lead to incorrect measurements.
5 Once the slit is filled with blood, the unit performs the blood sugar measurement. The
measuring device counts down for approx. five seconds. Then the measurement re-
sult is shown in the display.
Read the measured value.
For explanations and corrective measures concerning measured values, see the next
Chapter "Evaluating a blood sugar measured value", page 23.
If an error message is displayed, read the Chapter "Troubleshooting", page 33.
6 Remove the test strip from the unit and dispose of it carefully in accordance with the
applicable guidelines in order to prevent infection of other people.
Note
If the unit does not begin the measurement, do not subsequently apply more blood.
Instead, remove the test strip and end the test procedure. Start again using a new test
strip.
If the test strip is already in the unit and you do not put any blood on it within two min-
utes, the unit switches off. Remove the test strip then and reinsert it into the slot, so
that the unit switches on again automatically.
If you experience difficulties applying blood to the test strip correctly, contact customer
service.
If you are measuring in a dimly lit room, press the ON/OFF button to switch on the unit.
The test strip area lighting turns on and makes it easier for you to insert the test strip.
In addition, the backlighting turns on for the results display.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beurer GL40 mmol-L at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beurer GL40 mmol-L in the language / languages: English as an attachment in your email.

The manual is 2,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Beurer GL40 mmol-L

Beurer GL40 mmol-L User Manual - German - 40 pages

Beurer GL40 mmol-L User Manual - Dutch - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info