537052
20
Zoom out
Zoom in
Previous page
1/40
Next page
20 Beurer GL44 mg/dL
14 Hold the blood input gap (at the tip of the test strip) to the drops
of blood until the gap is completely filled and the measuring de-
vice in the display starts counting backwards. Do not press the
penetration area (fingertip or other body parts) to the test strip.
The blood must not be spread. The blood is sucked into the gap.
Note
Error message “002” appears on the display if the gap was not correctly and suciently filled
with blood. Repeat the measurement using a new test strip and a greater penetration depth.
Note
Do not add blood later if the device does not start measurement. Remove the test strip and end this
test. Use a new test strip.
The device switches itself o if the test strip has already been inserted into the device but no blood
is added to the test strip within two minutes. Briefly remove the test strip and reinsert it so that the
device automatically switches itself back on.
Contact our customer service if you are unable to fully cover the test strip in blood.
If you are measuring in a dark environment, press the On/O button to switch the device on. The test
strip light switches on and makes it easier to insert the test strip. The backlight is also switched on
in the results display.
5.3 Reading out result and highlighting measurements
Evaluating result
As soon as the gap is suciently filled with blood, the device performs the blood glucose measure-
ment. The blood glucose monitor counts down for approx. five seconds.
The measured result is subsequently shown on the display.
Read the measured values. For explanations and measures for the measured values, see chapter
“5.5 Evaluating measured blood glucose values”. If an error message is displayed, read chapter
“8. What if there are problems?”
Highlighting measured values
You have the following options to highlight measured values.
Before meals.
After meals.
General highlight (e.g. after exercising).
Highlighting measured values enables you, your GP or diabetes consultant to better check your
blood glucose values. For example, you can display the average values of all measurements taken
before meals.
OK
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beurer GL 44 mg dl at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beurer GL 44 mg dl in the language / languages: English as an attachment in your email.

The manual is 6,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Beurer GL 44 mg dl

Beurer GL 44 mg dl User Manual - German - 40 pages

Beurer GL 44 mg dl User Manual - Dutch - 40 pages

Beurer GL 44 mg dl User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info