619933
19
Zoom out
Zoom in
Previous page
1/32
Next page
Beurer GL42 mg/dL 19
5
Hold the input gap (at the tip of the test strip) to the drops of control solution until the gap is
completely filled and the measuring device in the display starts counting backwards.
When the gap is suciently filled with solution, the device performs a measurement. The de-
vice counts down for approx. five seconds. The measured result is then shown on the display.
6
Check whether the result is within the specified range of results for the control solution. This
range of results is printed on the test strip box.
Expected results
At room temperature, the measurements of the test using the control solution should be within the
range printed on the test strip box in approx. 95% of all tests.
Warning
The result range printed on the test strip box applies only to the control solution. This is not a rec-
ommended value for your blood glucose level.
If measured values are outside the specified range, check the following possible causes:
Cause Action
The first drop of control solution was not dis-
posed of.
The tip of the bottle was not cleaned correctly.
The bottle was not shaken well enough.
Rectify the cause and repeat the test.
Control solution and/or test strips have passed
their expiry date or are contaminated.
Repeat the test using a new bottle of control
solution and/or new test strip.
The control solution, test strips or blood glucose
monitor are too warm or too cold.
Bring the control solution, test strips and blood
glucose monitor to room temperature (+20 °C to
+26 °C) and repeat the test.
The test strips and control solution were kept at
a temperature and humidity outside the speci-
fied range.
Repeat the test using new/correctly stored test
strips and control solution.
Damaged test strips.
For example
Test strips that were exposed to fresh air for
too long.
The test strip box was not closed completely.
Repeat the test using a new test strip and/or a
new box of correctly stored test strips.
Old test strips. Open a new box of test strips. Repeat the test.
There is a problem with the blood glucose moni-
tor.
Contact Customer Services.
Functional test was incorrectly performed. Repeat the test and follow the instructions.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beurer GL 42 mg-dl at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beurer GL 42 mg-dl in the language / languages: English as an attachment in your email.

The manual is 4,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Beurer GL 42 mg-dl

Beurer GL 42 mg-dl User Manual - German - 36 pages

Beurer GL 42 mg-dl User Manual - Dutch - 32 pages

Beurer GL 42 mg-dl User Manual - French - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info