619933
14
Zoom out
Zoom in
Previous page
1/32
Next page
14 Beurer GL42 mg/dL
4.
initial use and basic settinGs
4.1 Removing the battery insulation strips, replacing the battery
Note
Remove the insulation strip before initial use.
1
Remove the battery compartment lid on the underside of the device.
2
If you are replacing the battery, reset the date and time as required (“Making and changing
basic settings” on page 14).
3
Insert a new battery of type CR 2032 3 V. Make sure that the battery is inserted with the correct
polarity, according to the label. See the graphic in the battery compartment.
4
Close the battery compartment lid again carefully.
Note
•
The batteries are almost empty if the replace battery symbol appears. Replace the battery as
soon as possible.
If “ ” appears on the display, the battery power level is so low that no more measurements can be
taken.
4.2 Making and changing basic settings
1
Remove the battery and then reinsert it. Alternatively, press the “+” button
[2] and the On/O button for a minimum of five seconds.
An acoustic signal sounds.
The year display flashes.
2
Setting the date and time
Note
•
You must set the date and time. Otherwise, you will not be able to save your measured values
correctly with a date and time to retrieve them later.
The time is displayed in the 24-hour format.
Set the year (calendar to 2099) by pressing the “+” or “–” [2] button. Confirm by pressing the
On/O button [5].
The day display flashes.
Proceed as described above for the month, day, hour and minute.
CR 2032 H
3V
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beurer GL 42 mg-dl at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beurer GL 42 mg-dl in the language / languages: English as an attachment in your email.

The manual is 4,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Beurer GL 42 mg-dl

Beurer GL 42 mg-dl User Manual - German - 36 pages

Beurer GL 42 mg-dl User Manual - Dutch - 32 pages

Beurer GL 42 mg-dl User Manual - French - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info