470659
25
Zoom out
Zoom in
Previous page
1/40
Next page
Beurer GL40 mg/dL 25
5.4 Function check with control solution
The control solution is used for checking the whole Blood Glucose Monitoring system.
This enables you to determine whether the measuring device and the test strips are func-
tioning correctly together and whether the test is performed correctly.
You should perform a control solution test if you suspect that the measuring device or test
strips may be faulty, or if you repeatedly receive unexpected blood glucose results. Also
test the measuring device if it has been dropped or damaged. The control solution is avai-
lable separately. When performing the control solution test, please follow the additional
instructions in the control solution user guide.
Important
Never use a control solution from other manufacturers. You can only verify the proper
function of your measuring device using the Beurer GL40 control solution.
Performing a function test with control solution
1 Hold the measuring device so that the display is facing you.
2
Insert a test strip into the slit on the measuring device, contacts first. Ensure that the
front side of the test strip is facing towards you (see "Test strip", page 14).
3
The unit switches on automatically and briefly shows the start display. As soon as the
hand
and the symbol are flashing, the unit is ready to perform measurements.
Note
Press the S or T rocker button to switch to control mode. "CtL" appears in the dis-
play. This means that the result is not saved in the memory so that your measure-
ment statistics are not falsified. Pressing S or T again causes "CtL" to disappear
from the display again and the value is stored as usual in the memory.
4
Shake the control solution well before use. Unscrew the cap and squeeze out a drop
of solution. Wipe away the first drop and squeeze out an additional drop.
5
To prevent the remaining control solution in the bottle from becoming contaminated
through the tip of the bottle in contact with the test strip, do not apply the drop directly
to the test strip. Apply the drop to a clean substrate. Then put the drop on the slit for
receiving blood on the test strip. The solution is sucked into the slit. Wipe the tip of the
bottle using a clean, dry paper tissue.
6
Once the slit is filled with solution, the unit begins the measurement. The unit counts
down for approx. five seconds. Then the measurement result is shown in the display.
7
Check whether the result is within the specified results range for the control solution.
This results range is printed on the container with the test strips.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beurer GL 40 mg at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beurer GL 40 mg in the language / languages: English as an attachment in your email.

The manual is 4,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Beurer GL 40 mg

Beurer GL 40 mg User Manual - German - 40 pages

Beurer GL 40 mg User Manual - Dutch - 40 pages

Beurer GL 40 mg User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info