470659
8
Zoom out
Zoom in
Previous page
1/40
Next page
8 Beurer GL40 mg/dL
2 Safety information and warnings
Risk of infection
All components of the measuring device and accessories may come into contact
with human blood, and are therefore a possible source of infection.
Warning
This measuring device must display the blood glucose content in mg/dL. The unit of
measure mg/dL appears next to each blood glucose level reading. Be sure to contac
t
customer service if your measuring device does not display mg/dL. You risk damag-
ing your health if you perform a blood glucose measurement using an unfamiliar unit
of measure, since values may be interpreted incorrectly and cause the wrong correc-
tive measures to be taken.
If the measuring device is used by more than one person, follow the generally applica-
ble rules concerning disinfection, safety and contamination.
Medical professionals and others who use this system on more than one patient
should be aware that all products or items that come into contact with human blood
should be handled as though they could transfer pathogens, even after cleaning them.
The lancing device is suitable for self-testing. Never share the lancing device or needle
lancet with others. Never use it on more than one patient (Risk of infection!).
Use a new sterile needle lancet for each blood test (for one-time use only).
General notes
Warning
Do not use the unit near strong electromagnetic fields, wireless systems or mobile
telephones.
Measuring blood glucose
Warning
The measured values you determine are useful for information purposes only – they are not
intended to replace consultation with your doctor. Discuss your measured values with your
doctor regularly. Do not change any aspects of your treatment unless instructed by your
doctor.
Water deficiency or a large loss of fluid, for example by sweating, can lead to false meas-
urement results.
A very high or very low haematocrit value (proportion of red blood cells) can lead to incor-
rect measurements. With a very high haematocrit value (over 60%), the displayed blood
glucose value may be too low. If you have a very low haematocrit value (below 20%), the
blood glucose value may be too high. If you do not know your haematocrit value, ask your
doctor.
Do not use the test strips to take blood glucose measurements of newborn infants.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beurer GL 40 mg at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beurer GL 40 mg in the language / languages: English as an attachment in your email.

The manual is 4,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Beurer GL 40 mg

Beurer GL 40 mg User Manual - German - 40 pages

Beurer GL 40 mg User Manual - Dutch - 40 pages

Beurer GL 40 mg User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info