470658

Beurer GL 34 Manual

34
Zoom out
Zoom in
Previous page
1/36
Next page
Beurer GL34 mg/dL
32
EMC
This device complies with European standard EN 61326 and is subject to specific preven-
tive measures in terms of electromagnetic compatibility. Note that portable and mobile
high-frequency communications equipment may interfere with this device. Further details
can be requested by contacting the customer service address provided below.
Note regarding function of test strips
The test strips enable a quantitative measurement of the glucose content of capillary
whole blood. When the slit for collecting blood comes into contact with a drop of blood, it
fills automatically through simple capillary action. The blood is sucked into the absorbent
slit of the test strip and the measuring device measures the sugar level in the blood.
The test is based on the measurement of an electric current caused by a chemical reac-
tion between the glucose and the test strip reagent. The device analyses this current. The
strength of the current varies according to the glucose content in the blood sample. The
results are shown on the display of the measuring device. Only a small quantity of blood is
required (0.5 microlitres) and the measurement takes approx. 6 seconds. The strips can
detect blood sugar levels in the range 20 to 600 mg/dL.
Chemical components of the test strip sensor
• Glucose oxidase 10%
• Electron shuttle 50%
• Enzyme protection 8%
• Non-reactive components 32%
Note regarding function of the control solution
The control solution contains a fixed concentration of glucose that reacts with the test
strip. A test with the control solution is performed in the same way as a blood test, but the
control solution is used instead of blood. The results of the control solution test must lie
within the specified results range. This results range is printed on every test strip con-
tainer.
Chemical composition of the control solution
The control solution is a red-coloured solution with a D-glucose content of less than 0.2%.
Ingredient Percentage concentration
D-glucose 0.05 – 0.19%
Salts 1.4%
Active ingredient for viscosity regulation 15.0%
Standards
The Beurer GL34 mg/dL measuring system for self-testing complies with the following
European Directives and standards: IVD (98/79/EC), EN 61010-1, EN 61010-2-101,
EN 13640, EN ISO 15197, MDD (93/42/EC).
… 34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beurer GL 34 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beurer GL 34 in the language / languages: English as an attachment in your email.

The manual is 5,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Beurer GL 34

Beurer GL 34 User Manual - German - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info