470657
20
Zoom out
Zoom in
Previous page
1/36
Next page
Beurer GL32 mg/dL
18
11
Slide the lancet ejector towards the needle lancet until
the needle lancet is released from the lancing device.
Dispose of the lancet in a sharp-proof container.
Carefully dispose of all blood samples and materials
with which you have come into contact. This prevents
injury and prevents infection spreading to other people.
12
Twist the cap back in place.
5.2 Measuring the blood sugar value
1
Hold the measuring device so that the display is facing you.
2
Insert a test strip, contacts first, into the device. Ensure that the front side is
facing you. You can handle any part of the test strip with clean, dry hands.
3
The device switches on automatically and shows the start display, shortly
followed by the checking symbol “
“ . As soon as the flashing blood droplet
symbol is displayed, the device is ready to perform measurements.
Hold the blood collection slit (at the point of the test
strip) against the blood droplet. Do not press the
puncture site (fingertip or other body part) against the
test strip. The blood must not be smeared. The blood
is sucked into the slit.
4
WARNING
Hold the blood collection slit of the test strip against the blood
droplet until the slit is completely filled and you hear a beep.
Withdrawing the test strip from the blood droplet before the beep
may lead to incorrect measurements.
5
Once the slit is filled with blood, the device performs the blood sugar meas-
urement. The measuring device counts down for 6 seconds, and the result of
the measurement is then shown in the display. Read the measured value. For
an explanation of the measured value and possible actions, see the next
chapter "5.3 Evaluating the measured value", page 19.
If an error message is displayed, refer to chapter “8 Troubleshooting" on page 28.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beurer GL 32 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beurer GL 32 in the language / languages: English as an attachment in your email.

The manual is 2,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info