715892
11
Zoom out
Zoom in
Previous page
1/52
Next page
11
4.2 Switching on
The fastest way to warm up the foot warmer is to initially select the highest heat setting (setting 2). The setting
can be reduced later if necessary.
The foot warmer can, of course, be used at any time, even when it is switched off: its fleecy fabric
will warm the feet if there is no socket nearby.
4.3 Switching off
To switch the foot warmer off, set the sliding switch for massage and heat settings to the setting “0” (OFF).
NOTE
If the foot warmer is not in use, set the sliding switch to “0” (OFF). Disconnect the mains part from the
foot warmer. Remove the mains part from the socket.
4.4 Massage settings/heat settings
Massage only: ( )
Setting I (low): relaxing massage
Setting II (high): invigorating massage
The sliding switch for the heat settings is in the “0”
position.
Heat only: ( )
Setting I: minimum heat
Setting II: maximum heat
The sliding switch for the massage settings is in
the “0” position.
Massage with heat: (
,
)
Massage and heat setting freely selectable.
No massage or heat:
Both sliding switches are set to “0”.
WARNING
If the foot warmer is being used over several hours, we recommend that
you select the lowest heat setting on the controller to avoid overheating
the feet, which may lead to burns to the skin.
5. Cleaning and maintenance
WARNING
Before cleaning, always remove the mains part from the socket first.
Then disconnect the mains part cable from the foot warmer controller.
Otherwise, there is a risk of damage.
IMPORTANT
The controller must never come into contact with water or other liquids, as this may cause damage
To clean the controller, use a dry, lint-free cloth. Do not use any chemical or abrasive cleaning agents.
Small marks on the foot warmer can be removed with a damp cloth and, if necessary, with a little liquid
detergent for delicate laundry.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beurer FWM 45 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beurer FWM 45 in the language / languages: English, German, Danish, French, Italian, Polish, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 7,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info