470144
27
Zoom out
Zoom in
Previous page
1/144
Next page
27
Hold the thermometer 2 to 3 cm from the measuring point. Press the
SCAN button and move the thermometer from side to side over the
forehead area (g. 8).
During measurement you will hear short beeps (only if the acoustic sig-
nal is activated), which signal that the thermometer has found a new
highest measurement.
End of measurement is signalled by a long beep.
Release the SCAN button.
You can now read the measured value.
In addition to the temperature, the fever
or no fever symbols also appear in the dis-
play:
The no fever symbol
indicates that the body temperature is within normal range; the
fever symbol
indicates a measurement equal to or higher than 38°C (100.4°F), which
triggers a temperature alarm.
If the acoustic signal is switched on, three beeps will sound once the measurement is com-
plete if the temperature is equal to or higher than 38°C (100.4 °F).
The measuring time is usually 2 seconds but may take up to 30 seconds.
When two short beeps sound and the forehead symbol
stops flashing, the device is
ready to take another measurement.
The measurement is automatically saved with the date/time and the “fever”
/ “no fever
classification.
6.1 Displaying saved measurements
The device only stores measurements in forehead temperature mode . The device auto-
matically stores the values from the last 60 measurements.
When 60 storage places are exceeded the oldest value is deleted.
The memory can be called up as follows:
With the thermometer switched on, press and hold the MODE/MEM button for 5 seconds.
The most recent measurement is displayed.
With each subsequent pressing of the MODE/MEM button, first the storage space num-
ber is displayed followed by the measurement upon release.
Fig. 8
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beurer FT 90 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beurer FT 90 in the language / languages: English, German, French, Italian, Polish, Turkish, Spanish as an attachment in your email.

The manual is 1,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Beurer FT 90

Beurer FT 90 User Manual - Dutch - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info