Manual Beurer FC 96 (page 11 of 52) (English, German, French, Italian, Polish, Turkish, Spanish)

695981

Zoom out

Zoom in

1/52

7. Initial use

7.1 Charging the device

Charge the device for at least 4 hours before initial operation. To do this, proceed as follows:

1. Insert the mains cable into the charger.

2. Insert the mains adapter into the socket.

3. Insert the facial brush into the charger from above. The facial brush display lights up whilst charging is in progress.

The battery symbol

in the display shows the current charge status.

7.2 Attaching the brush

1. The attachment you wish to use should be ﬁxed from above onto the mounting ﬁxture of the device.

2. To remove the brush attachment after use, pull it up and o.

8. Use

1. Moisten the attached brush attachment with water. Never use the device with a dry brush attachment as this can ir-

ritate the skin.

2. Apply the cleansing gel to your facial skin.

3. To switch on the device, press and hold the ON/OFF/speed button for 1 second. The brush attachment will begin to

rotate.

4. The device has four speed settings. To switch between the individual speed settings, brieﬂy press the ON/OFF/speed

button. The selected speed setting is displayed via the corresponding circles in the display that are lit up.

5. Using the rotation button, select your desired rotation level. The device has circular rotation for gentle facial cleansing

and oscillating rotation for thorough facial cleansing.

6. Now apply the device gently to your face and cleanse your facial skin using even movements to remove residue, dirt

and dead skin cells.

Note

To ensure comfortable treatment, do not apply the rotating brush attachment too ﬁrmly to the skin. Treat each section of

skin for a maximum of 20 seconds only.

The brush features a 1-minute timer and stops every 20 seconds for 1 second to indicate that you should switch to clean-

sing a dierent area. The facial brush switches itself o automatically after 3x 20 seconds. The recommended application

period per use is 1 minute.

If the facial brush displays the following symbol in the display, we recommend changing the brush attachment. This

is the only way to continue to ensure optimum cleaning performance. You can obtain a new brush attachment in shops

or from the relevant service address (as speciﬁed in the service address list).

After you have changed the brush attachment, hold down the ON/OFF/speed button and the rotation button at the same

time for at least 2 seconds. The symbol illuminates continuously again.

7. Switch o the device after use. To switch o the device, press and hold the ON/OFF/speed button for 1 second.

8. Cleanse your face thoroughly with water to remove any residue from your skin.

9. Pat your skin dry with a towel and then apply a moisturising cream using even, circular movements.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Beurer FC 96 in the language / languages: English, German, French, Italian, Polish, Turkish, Spanish as an attachment in your email.

The manual is 4,83 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Beurer FC 96 Manual

Product: