620006
11
Zoom out
Zoom in
Previous page
1/44
Next page
11
7.2 Attaching the brush
The device features a soft brush attachment.
1. Fit the soft brush attachment onto the mounting fixture of the device from the front.
2. To remove the brush attachment after use, pull it forwards.
8. Use
1. Moisten the attached brush attachment with water. Never use the device with a dry brush attachment as this can ir-
ritate the skin.
2. Apply the cleansing gel to your facial skin.
3. To switch on the device, press and hold the ON/OFF/speed button for one second. The brush attachment will begin
to vibrate.
4. The device features a slow, medium and fast speed setting. To switch between the individual speed settings, briefly
press the ON/OFF/speed button.
5. Using the function button, select your desired function. The device has a vibration function for gentle facial cleansing
and a pulsation function for thorough facial cleansing.
6. If you have problem skin, you can switch on a blue light during use which combats skin impurities and blemishes. To
add the blue light function, press the light button. If you have activated the pulsation function, the blue light pulsates
and is not permanently lit.
7. Now apply the device gently to your face and cleanse your facial skin using even movements to remove residue, dirt
and dead skin cells.
Note
To ensure comfortable treatment, do not press the brush attachment too firmly against the skin. Treat each section of skin
for a maximum of 20 seconds.
The brush features a 1-minute timer and stops every 20 seconds for 1 second to indicate that you should switch to cleans-
ing a dierent area. The facial brush switches itself o automatically after 3x 20 seconds. The recommended application
period per use is 1 minute.
8. Switch o the device after use. To switch o the device, press and hold the ON/OFF/speed button for one second.
9. Cleanse your face thoroughly with water to remove any residue from your skin.
10. Pat your skin dry with a towel and then apply a moisturising cream using even, circular movements.
9. Cleaning
IMPORTANT
Before beginning cleaning, always pull the mains adapter out of the socket.
9.1 Cleaning the device and the charger
Clean the device using only the methods specified.
Clean the device after use with a soft, slightly damp cloth. If it is very dirty, you can also moisten the cloth with a mild
soapy solution. Do not use any abrasive cleaning products.
Clean the charger with a soft, slightly damp cloth from time to time.
Esure that no water enters the device or the charger. If this should happen, the device and the charger should only be
used again once they have fully dried out.
9.2 Cleaning the brush attachment
To clean the brush attachment, pull it forwards o the device.
Clean the brush attachment thoroughly with water after each use.
10. Disposal
Dispose of the device in accordance with EC Directive – WEEE (Waste Electrical and Electronic Equipment).
If you have any questions, please contact the local authorities responsible for waste disposal.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beurer FC 65 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beurer FC 65 in the language / languages: English, German, French, Italian, Polish, Turkish, Spanish as an attachment in your email.

The manual is 2,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Beurer FC 65

Beurer FC 65 User Manual - Dutch - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info