667162
13
Zoom out
Zoom in
Previous page
1/56
Next page
13
5. Operation
Start-up
Remove the packaging
Check the device, power supply and cables for damage.
Before you plug in the foot bath, fill it up to the fill-level mark (approx 2-3 cm full) with either warm or cold
water.
Route the cable safely so that there is no risk of anyone tripping over it.
Make yourself comfortable in a chair and place your feet on the foot rest and apply slight pressure. Never
stand up in the foot bath. The rubber feet on the base of the unit prevent it from sliding.
The device has two massage functions:
Function 1
: bubble massage, infrared light and water heating
Function 2
: activation of vibration massage
Bubble massage, infrared light and water temperature control
- Press the - button to switch on the bubble massage (with infrared light and water temperature control).
- Press the - button to switch the bubble massage (with infrared light and water temperature control)
off again.
These functions are only available together.
Optional vibration massage
While the bubble massage with infrared light and water temperature control is running, you have the option
to switch on the vibration massage. The vibration massage will only function when the bubble massage with
infrared light and water temperature control is switched on. It cannot be used separately.
- Press the
- button to activate the vibration massage.
- Press the
- button to switch the vibration massage off again.
Massage roller
You can experience a special massage effect by moving your feet back and forth on the 2 massage rollers
integrated into the bottom of the footbath. The massage rollers can optionally be removed by pulling them
firmly upwards. When installing the rollers, make sure that the roller fixing points downwards, as shown in
the illustration.
Removable attachments
Place the chosen attachment onto the fixture provided. The brush attachment can be used to stimulate the
reflex zones in the soles of your feet. The massage attachment provides a soothing massage for your feet
and promotes the circulation. The corn and callus remover is used to remove dead skin cells and calluses.
Magnetic field and infrared light
The foot bath features 16 magnets and 4 infrared light dots which are integrated into the foot tub. They help
to boost circulation and stimulate reflexology points.
Removable aroma filter
The removable aroma filter allows you to easily add bath additives such as bath crystals, bath salts etc.
To do this, remove the filter cover [11] from the device by pulling it upwards. Remove the aroma filter [12].
Add bath products up to the level of the mark on the inside of the filter/underneath the first line of holes.
Now attach the filter underneath the filter cover. When doing so, note the arrow marks on the filter and foot
bath; these indicate the correct position of the filter. The two arrows must point to each other. Reattach the
filter cover.
The filter can be easily removed and cleaned after use. Rinse the filter with clean water.
Please observe the fill-level mark on the filter and do not fill the filter above this mark.
Be aware that some bath products may create a great deal of foam when combined with the bubble massage.
For this reason, do not leave the foot bath unsupervised and switch it off immediately if excess foam builds up.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beurer FB35 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beurer FB35 in the language / languages: English, German, French, Italian, Polish, Spanish, Spanish as an attachment in your email.

The manual is 4,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Beurer FB35

Beurer FB35 User Manual - Dutch - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info