707287
26
Zoom out
Zoom in
Previous page
1/124
Next page
26
switched on for the first time, program A is automatically
activated.
Selecting a program
Press the program button P [3] to switch between the pro-
grams.
The following programs are available:
Program Frequency Time
A 4 Hz – 110 Hz (3 phases) 30 min
B 4 Hz 25 min
C 2 Hz (burst) 25 min
D 100 Hz 25 min
Note:
With program A, you will feel the eect become
stronger when the program changes from phase 1
to phase 2 (after approx. 10 minutes). This is normal
and intentional. If the intensity seems too high, you
can lower it by simply pressing the intensity button
[2].
Note:
If the program is changed during stimulation (for ex-
ample from A to B), the output intensity will increase
gradually in the new program until it reaches the in-
tensity that was previously set. This can be stopped
if required by pressing and holding the intensity button
[2] for two seconds or by switching o the device by press-
ing and holding the On/O button [1] for two seconds.
Stopping pulses that are too strong
You can lower the intensity at any time or turn the de-
vice o by pressing and holding the On/O button [1]
(~ 2seconds).
Setting the intensity
Press the intensity button [2] to gradually increase the
intensity or the intensity button [2] to lower the intensity.
There are 20 levels of intensity that can be selected. De-
pending on the intensity level, you will start to feel tingling,
which may increase up to muscle contractions.
Select a setting that is comfortable for you during
use.
Preventing unwanted pulse changes
To prevent unintentional increases in intensity during a
treatment, simply switch the button lock on. To do this,
press and hold the program selection button P [3] for ap-
prox. 2 seconds. An acoustic signal sounds and the sym-
bol “ ” appears in the display [6]. To release the button
lock, press and hold the P button [3] for approx. 2 seconds.
Reacting to unpleasant sensations
If you feel a twinge or itching on your skin, you should
switch the device o and proceed as follows:
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beurer EM 39 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beurer EM 39 in the language / languages: English, German, French, Italian, Polish, Turkish, Spanish as an attachment in your email.

The manual is 6,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info