715866

Beurer EM 27 Manual

21
Zoom out
Zoom in
Previous page
1/124
Next page
20 21
•
Do not move the cu or put it on if the control unit is
switched on.
•
Only connect the connection cable for the electrode plug
to the intended control unit and the cu that is included.
•
Do not pull on the connection cables during treatment.
•
Do not bend or pull on the end of the connection cable.
•
Do not wear any electronic devices, such as watches,
while using the device.
Precautions
Warning
•
During the initial few minutes, use the device while sit-
ting or lying down to minimise the risk of accidental
injuries as a consequence of isolated cases of vagal
responses (feeling of faintness). If you feel faint, switch
o the device immediately, lie down and support the
legs in an elevated position (approx. 5 – 10 min).
•
The treatment should be comfortable. If the device does
not work properly, or you feel unwell or experience pain,
stop using it immediately.
•
Only remove the cu once the device has been switched
o.
•
Do not use the device near (~ 1m) shortwave or micro-
wave devices (such as mobile phones) as these may
cause fluctuations in the output values of the device.
•
The use of the device may be limited in the presence
of electromagnetic disturbances. This could result in is-
sues such as error messages or the failure of the display/
device.
•
Avoid using this device directly next to other devices or
stacked on top of other devices, as this could lead to
faulty operation. If, however, it is necessary to use the
device in the manner stated, this device as well as the
other devices must be monitored to ensure they are
working properly.
•
The use of accessories other than those specified or
provided by the manufacturer of this device can lead to
an increase in electromagnetic emissions or a decrease
in the device’s electromagnetic immunity; this can result
in faulty operation.
•
Failure to comply with the above can impair the perfor-
mance of the device.
•
Never immerse the device in water or other liquids.
•
Do not use in the vicinity of highly flammable substances,
gases or explosives.
Notes on the electrodes
Important
•
The electrodes must not be attached to areas of broken
skin.
•
Max. recommended output value for electrodes is
5 mA/cm
2
.
•
Eective current densities over 2 mA/cm
2
require
increased attentiveness from the user.
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beurer EM 27 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beurer EM 27 in the language / languages: English, German, French, Italian, Polish, Turkish, Spanish as an attachment in your email.

The manual is 6,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info