715870

Beurer EM 26 Manual

32
Zoom out
Zoom in
Previous page
1/148
Next page
32 33
gradually in the new program until it reaches the intensity
that was previously set. This can be stopped if required by
pressing the intensity button ▼ [2] or by switching o the
device by pressing and holding the On/O button [1] for
two seconds.
Stopping pulses that are too strong
You can lower the intensity at any time or turn the device
o by pressing and holding the On/O button [1] (~ 2 sec-
onds).
Adjusting the intensity
Press the intensity button ▲ [2] to gradually increase the
intensity or the intensity button ▼ [2] to lower the intensity.
There are 20 levels of intensity that can be selected. De-
pending on the intensity level, you will start to feel tingling,
which may increase up to muscle contractions.
Select a setting that is comfortable for you during
use.
Preventing unwanted pulse changes
To prevent unintentional increases in intensity during a
treatment, simply switch the button lock on. To do this,
press and hold the program selection button P [3] for ap-
prox. 2 seconds. An acoustic signal sounds and the sym-
bol “ ” appears in the display [6]. To release the button
lock, press and hold the P button [3] for approx. 2 seconds.
Reacting to unpleasant sensations
If you feel a twinge or itching on your skin, you should
switch the device o and proceed as follows:
•
Check that the electrodes are OK and do not show any
signs of damage.
•
Check that the round cover is still on the electrode con-
nections.
•
Remove the cu and moisten it again completely.
•
When you put it back on, ensure that there is good con-
tact with the skin and that the skin is damp.
Pausing a program
If you want to pause a program while it is running, briefly
press the Pause button [1]. An acoustic signal sounds and
the pause symbol “II” flashes in the display [6]. The pro-
gram can be continued by pressing the button [1] again.
Contact detection
If the electrodes are not in contact with the body, the inten-
sity will automatically be set to zero. This prevents unwant-
ed electrical stimulation. The intensity cannot be increased
if the electrodes are not in contact with the body.
Memory function
The device saves the last program that was set.
After replacing the battery, the device starts again with the
first program.
… 32 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beurer EM 26 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beurer EM 26 in the language / languages: English, German, French, Italian, Polish, Turkish, Spanish as an attachment in your email.

The manual is 6,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info