568833

Beurer BY 80 Manual

5
Zoom out
Zoom in
Previous page
1/24
Next page
5
2. Operation
2.1 Battery
The scale requires 2 x 1.5 V alkaline mikro AA batteries. Before using the baby scales, these must
be inserted in the battery compartment beneath the scales, ensuring the right polarity. When “
Lo
”
appears in the display, the batteries need to be replaced.
Spent batteries and rechargeable batteries do not constitute normal household waste!
They are considered to be toxic waste and, as such, should be disposed of in special
containers, toxic waste collection points or brought to electrical goods dealers.
Note: Batteries containing pollutant substances are marked as follows:
Pb = Battery contains lead, Cd = Battery contains cadmium, Hg = Battery contains
mercury.
2.2 Weighing
The weight is displayed in steps of 5 g from a minimum weight of 50 g.
Press the button “
” to switch on the scale.
As soon as “0.000 kg” appears on the display, the scale is ready to take measurements.
Now place the baby on the weighing area. Do this very carefully; do not let the baby fall and take
particular care with the baby’s head.
This baby scale has a “HOLD” function (AUTO HOLD and MECHANICAL HOLD). The AUTO HOLD
function establishes the baby’s weight on the display as soon as he/she is still enough to achieve
an exact measurement value. If the baby is moving around vigorously, his/her weight cannot be re-
corded. Therefore, try to calm the wriggling baby to achieve a rapid measurement, but do not touch
the baby, as this will affect the weight measurement.
As soon as the baby’s weight is established on the display, the word “HOLD” stops flashing and the
weight is displayed for a further 20 seconds. The scale then switches off automatically.
If the baby is wriggling about too vigorously, you can select the MECHANICAL HOLD function by
pressing the “HOLD” button. Within 3 seconds, the word “HOLD” stops flashing and the weight is
displayed for a further 20 seconds.
If you do not want to place the baby directly on the weighing surface, but prefer to use a towel, for
example, you have to place the towel on the scales BEFORE switching them on. If the towel (and
any other items which you want to deduct again during weighing) weighs over 50 g, you can also
use the TARA function. Once you have pressed the TARA button, ‘Tare’ is shown in the display. To
reset the scale to 0.000 g, press the TARA (tare) button after “HOLD” has stopped flashing.
On delivery the scale is set at “kg” units. The button ”kg/lb/oz“ allows you to switch at any time
between kilogramme units and pounds (lb) and ounces (oz).
2.3 Disposal
Please dispose of the device in accordance with the directive – WEEE (Waste Electrical and
Electronic Equipment). If you have any queries, please refer to the local authorities responsible
for waste disposal.
Pb Cd Hg
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beurer BY 80 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beurer BY 80 in the language / languages: English, German, French, Italian, Polish, Turkish, Spanish as an attachment in your email.

The manual is 2,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info