Manual Beurer BY 76 (page 11 of 44) (English, German, French, Italian, Polish, Turkish, Spanish)

568831

Zoom out

Zoom in

1/44

For this, follow the steps in the ‘Operation’ section.

If you would like to use the device immediately after the empty process, allow it to cool

for at least 20 minutes after draining the residual water. The same applies to numerous

consecutive uses.

7. Operation

1. Clean the parts that are to be sterilised with mild washing up liquid or in the dishwasher. Disas-

semble any assembled parts.

2. Measure 120 ml distilled water (alternatively tap water) and pour it into the sterilisation container.

3. Now place the bottles into the bottle stand with the opening pointing downwards and place the

teats or other small parts in the basket for small parts.

4. Place the bottle stand and the basket for small parts into the sterilisation container.

5. Then put the lid on the device.

6. Plug the mains plug into a socket.

The display shows 0. The device is ready for use.

7. Press the

switch to start the sterilisation process.

Once the operating temperature has been reached, the remaining sterilisation time is continu-

ously shown in the display, starting from 7 minutes.

At the end of the process, a signal sounds. You may now switch the steriliser o.

8. After a cooling down period of at least 5 minutes, carefully open the lid and remove the sterilised

parts using the gripping tongs.

9. Shake the parts to remove any excess water.

Remove the mains cable. Drain the residual water and dry the container with a cloth.

• After the sterilisation process, three bars are shown on the display. This shows that from

this point onwards, the items in the sealed steriliser will remain sterile for up to three

hours. The passage of time is displayed in hourly steps from III to I. After the nal hour

has passed, 0 is shown on the display.

• After three hours have passed, the items must be newly sterilised, regardless of whether

or not the device was opened.

• Use the sterilised parts immediately after removal, or else they will require re-sterilising.

8. Cleaning and maintenance

The service life of the device depends on careful use:

• Remove the plug cable before tipping out residual water or cleaning the device.

• Only use a damp cloth to clean the device. Do not use any abrasives or other cleaning agents.

• Use distilled water for the sterilisation.

• If you use tap water: Descale the device with vinegar or citric acid. Mix 50 ml white vinegar with

100 ml cold water or a packet of citric acid with 200 ml cold water and pour the solution into

the device. Allow the solution to take eect until the limescale has dissolved; do not start the

sterilisation process during this time. Drain the liquid away, rinse out the device thoroughly and

subsequently dry it with a cloth.

• Descale the device every four weeks or so.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Beurer BY 76 in the language / languages: English, German, French, Italian, Polish, Turkish, Spanish as an attachment in your email.

The manual is 2,79 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Beurer BY 76 Manual

Product: