715719
31
Zoom out
Zoom in
Previous page
1/132
Next page
31
5. Clean the motor unit carefully using a slightly damp cloth only. Do not use any cleaning agents or sol-
vents. Under no circumstances should you hold the motor unit under water, as this can cause liquid to
enter and damage the breast pump. If you do not intend to use the breast pump for a prolonged period
of time, remove the batteries.
9. What if there are problems?
Problem Potential solutions
There is no suction from the breast
pump.
Check all parts of the breast pump are correctly assembled.
Check whether the pump attachment is correctly placed on the
breast.
No breast milk is being pumped.
Check that the silicone tube is correctly inserted, the suction level
is not set to the minimum and the breast pump is switched on.
Ensure that there is no milk remaining in the silicone valve and
obstructing the milk flow.
Pumping the breast milk is causing
pain.
Try to relax and then attempt it again a few minutes later. As you
use the breast pump more and more, you will find it easier to
pump milk.
Reduce the suction level using the - button.
Ensure that there is no milk remaining in the silicone valve and
obstructing the milk flow.
If the pain worsens, consult your doctor.
The breast milk is leaking out under-
neath the silicone cushion.
Remove the silicone cushion and re-attach it. Ensure the silicone
cushion is correctly positioned and firmly secured to the pump
attachment.
Lean your upper body forwards slightly.
One of the breast pump compo-
nents has become altered or dam-
aged.
Do not use any corrosive, gaseous cleaning agents or solvents.
In some cases, marked fluctuations in temperature can damage
the plastic on the breast pump.
If any of the parts becomes damaged, stop using the breast pump.
The breast pump will not switch on
Ensure that the breast pump is correctly assembled and switched
on.
Ensure that the mains part plug is correctly connected to the breast
pump.
9.1 Replacement parts and wearing parts
Item Item number
Pump attachment including silicone cushion (stand-
ard size), silicone membrane, silicone valve, silicone
tube and bottle including screwed plug
953.15
Bottle with teat and bottle cap 163.719
Adapter for Avent and NUK bottles 163.720
2 silicone cushions (small and standard) 163.721
Manual pump attachment including silicone cush
-
ion (standard size)
163.722
Bottle stand 163.723
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beurer BY 70 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beurer BY 70 in the language / languages: English, German, French, Italian, Polish, Turkish, Spanish as an attachment in your email.

The manual is 13,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info