Manual Beurer BM77 (page 142 of 144) (English, German, French, Italian, Polish, Spanish, Spanish)

653520

142

Zoom out

Zoom in

1/144

142

Table 3

Guidance and manufacturer’s declaration – electromagnetic immunity

The BM 75 is intended for use in the electromagnetic environment speciﬁed below. The customer or the user of the BM 75 should assure that it is

used in such an environment.

Immunity test IEC 60601 test

level

Compliance

level

Electromagnetic environment – guidance

Conducted RF

IEC 61000-4-6

Radiated RF

IEC 61000-4-3

3 V

rms

150 kHz to 80 MHz

3 V/ m

80 MHz to 2.5 GHz

3 V

rms

3 V/ m

Portable and mobile RF communications equipment should be used no closer to any part of

the BM 75, including cables, than the recommended separation distance calculated from the

equation applicable to the frequency of the transmitter.

Recommended separation distance:

d = 1.2

d = 1.2 80 MHz to 800 MHz

d = 2.3

800 MHz to 2.5 GHz

Where P is the maximum output power rating of the transmitter in watts (W) according to the

transmitter manufacturer and d is the recommended separation distance in meters (m).

Field strengths from ﬁxed RF transmitters, as determined by an electromagnetic site survey,

should be less than the compliance level in each frequency range.

Interference may occur in the vicinity of equipment marked with the following symbol:

NOTE 1 At 80 MHz and 800 MHz, the higher frequency range applies.

NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is aected by absorption and reﬂection from structures,

objects and people.

Field strengths from ﬁxed transmitters, such as base stations for radio (cellular/cordless) telephones and land mobile radios, amateur radio, AM and

FM radio broadcast and TV broadcast cannot be predicted theoretically with accuracy. To assess the electromagnetic environment due to ﬁxed RF

transmitters, an electromagnetic site survey should be considered. If the measured ﬁeld strength in the location in which the BM 75 is used exceeds

the applicable RF compliance level above, the BM 75 should be observed to verify normal operation. If abnormal performance is observed, additio

nal measures may be necessary, such as re-orienting or relocating the BM 75.

Over the frequency range 150 kHz to 80 MHz, ﬁeld strengths should be less than 3 V/m.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Beurer BM77 in the language / languages: English, German, French, Italian, Polish, Spanish, Spanish as an attachment in your email.

The manual is 10,78 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Beurer BM77

Beurer BM77 User Manual - Dutch - 20 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Beurer BM77 Manual

Product: