470361
14
Zoom out
Zoom in
Previous page
1/72
Next page
14
The time is shown in 24 hour format. The device also has five
languages. The device is set to German on delivery. Proceed
as follows to set the date, time and language:
Press the memory key (M) for over 5 seconds.
The day starts flashing. Use the +/- key to set the day from 1
to 31 and confirm with the memory key (M).
Set the month, hour and minute and confirm in each case
with the memory key (M).
After setting the date and time you can set the language.
Use the + and - volume keys to select the following languag-
es: L1 = German, L2 = Italian, L3 = French, L4 = Spanish,
L5 = Russian, L0 = no language. Confirm your selection with
the memory key (M).
You can then set the volume of the selected language:
Vol 3 = high, Vol 2 = medium, Vol 1 = low. Confirm your se-
lection with the memory key (M).
Note: Language off (L0) means that voice output is not se-
lected and the measurement value will not be announced.
Mains operation
You can also operate this device with a mains adapter. No bat-
teries should be in the battery compartment for this. The mains
adapter is available from retailers or from the service address
under order no. 071.13. The blood pressure monitor should
only be used with the mains adapters specified here. The
mains adapter should only be connected to the mains voltage
indicated on the rating plate. Once you have disconnected the
device from the mains, the date and time on the blood pres-
sure monitor are lost. Any measurement results that have been
stored are however retained.
5. Measuring blood pressure
Positioning cuff
Fit the cuff round your bare left up-
per arm. Blood circulation in the
arm should not be restricted by tight
clothing or other objects.
The cuff should be placed on the
upper arm so that the lower edge
is 2 to 3 cm above the bend of the
elbow and above the artery. The tube
should be in line with the centre of
the palm.
Now place the free end of the cuff
snugly, but not too tightly, around
the arm, and fix it with the Velcro fas-
tener. The cuff should be fitted tight
enough to allow just two fingers to fit
beneath the cuff.
Insert the cuff tubing into the socket
for the cuff attachment.
Important: The instrument should only be operated with the
original cuff. The cuff is suitable for an arm circumference of
23 to 33 cm.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beurer BM 19 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beurer BM 19 in the language / languages: English, German, French, Italian, Polish, Turkish, Spanish as an attachment in your email.

The manual is 3,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info