470661
29
Zoom out
Zoom in
Previous page
1/52
Next page
Beurer BGL40 mg/dL
27
4
Check the code number. If the numbers are different remove the test strip
and code the monitor (see "6.1 Checking code number (coding)” page
24).
5
Press the 'M' button to switch to control mode. In control mode test results
are not saved and your statistics are not skewed.
6
CTL is shown on the display.
7
Shake the control solution well before use. Unscrew the cap and squeeze
out one drop. Wipe the first drop away and squeeze out another drop.
8
Do not apply the drop directly to the test strip, otherwise the control
solution remaining in the vial tip may be contaminated by contact with the
test strip. First place the drop on your fingertip or on a clean surface.
Then hold the drop to the slot for taking blood on the test strip. The
solution is sucked into the slot. Wipe the tip of the vial with a clean, dry
paper towel.
9
When the slot is filled with solution, the monitor carries out the test. The
monitor counts back for approximately six seconds. The result is shown in
the display.
10
Check that the test result is within the specified range of the control
solution. The result range is printed on the test strip container.
Expected results
At room temperature the test results with the control solution should be within the
range printed on the test strip container for approximately 95% of all tests.
WARNING
The results range printed on the test strip container is only applicable to
the control solution. It is not a recommended value for your blood
glucose level.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beurer BGL 40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beurer BGL 40 in the language / languages: English as an attachment in your email.

The manual is 5,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info