470244
13
Zoom out
Zoom in
Previous page
1/68
Next page
13
electric current. The body fat percentage and other physical relationships in the body can be determined
by measuring the electrical resistance (impedance) and calculating constants and individual parameters
such as age, height, gender and degree of activity.
Muscle tissue and water have good electrical conductivity, and therefore lower resistance. Bones and fatty
tissue, on the other hand, have low conductivity as fat cells and bones conduct hardly any current as a
result of their very high resistance.
Please be aware that values obtained from the diagnostic scale represent only an approximation of actual
analytical medical data. Only a specialist physician can accurately determine body fat, body water, muscle
percentage and bone structure using medical procedures (e.g. computed tomography).
General tips
If possible, always weigh yourself at the same time of day (preferably in the morning), after using the toi-
let, on an empty stomach and unclothed, in order to achieve comparable results.
Important for the measurement: only measure body fat when barefoot and with the soles of the feet
slightly moist.
Completely dry soles can result in unsatisfactory measurements due to inadequate conductivity.
Stand still and upright during the measurement.
Wait a few hours after unaccustomed physical activity.
Wait approx. 15 minutes after getting up in the morning to allow the water in the body to distribute.
Remember that only long-term trends are important. Short-term changes in weight within a few days are
usually caused by a loss of fluid. Body water plays an important role towards our general wellbeing.
Limitations
When measuring body fat and other values, deviating and implausible results may occur in:
children under approx. 10 years,
competitive athletes and body builders,
pregnant women,
persons with fever, undergoing dialysis treatment or with symptoms of edema or osteoporosis,
persons taking cardiovascular medication (affecting the heart and vascular system),
persons taking vascular dilating or vascular constricting medication,
persons with considerable anatomic deviations of the legs in relation to total body size (length of the
legs considerably shortened or lengthened).
7. Settings
Enter your personal information before using the scale.
On delivery, the scale is set to “cm” and “kg”. At the back of the scales is a switch with which you can
switch between “inches”, “pounds” and “stones” (lb, st).
Setting user data
You must enter personal user parameters in order to measure your body fat percentage and other physical
data.
The scale has 10 user memory locations which allows, for example, you and your family members to save
personal settings and retrieve them later.
Switch on the scale. Wait until the display shows “0.0 kg”.
Start setting with the SET key. The first memory space flashes in the display.
Select the required memory space with the / key and confirm with the SET key.
Now you can adjust the following settings:
User data Parameters
Memory position 1 to 10
Body height 100 to 220 cm (3‘ 3.5“ to 7‘ 2.5“)
Age 10 to 100 Jahre
Sex man (
), woman ( )
Degree of activity 1 to 5
Modifying values: Press or or press and hold for more rapid progress.
Confirming entries: Press the SET button.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beurer BG40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beurer BG40 in the language / languages: English, German, French, Italian, Polish, Turkish, Spanish as an attachment in your email.

The manual is 1,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Beurer BG40

Beurer BG40 User Manual - Dutch, Danish, Portuguese, Spanish, Norwegian, Finnish - 92 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info