715957
11
Zoom out
Zoom in
Previous page
1/60
Next page
11
• Ages 10 to 99 years and height settings from 100 to 220 cm (3-03” to 7-03”) can be preset. Load capacity: max.
180 kg (396 lb, 28 st). Result in steps of 100g (0.2 lb, 1/4 st). Measurements of body fat, body water and muscle
density in steps of 0.1%.
When supplied to the customer, the scale is set to weigh and measure in “kg” and “cm”.
On the back of the scale, there is a toggle button where you can select “pounds” (lb) and
“stones” (st).
Place the scale on a firm level floor; a firm floor covering is required for correct measurement.
The scale should be cleaned occasionally with a damp cloth. Do not use abrasive deter-
gents and never immerse the scale in water.
Protect the scale against hard knocks, moisture, dust, chemicals, major temperature fluc-
tuations and heat sources which are too close (stove, heating radiator).
Repairs may only be carried out by customer service or authorized dealers. Before submitting any complaint,
first check the batteries and replace them if necessary.
2. Operation
2.1 Batteries
If present, pull the battery insulating strip o the battery compartment cover or remove the bat-
tery’s protective film and insert the battery according to the polarity. If the scale fails to operate,
remove the battery completely and insert it again. Your scale is equipped with a “replace bat-
tery” indicator. When the scale is operated with a battery which is too weak, “Lo” appears in the
display field and the scale automatically switches o. In this case the batteries must be replaced
(2x CR 2032).
2.2 Measuring weight only
Step onto the scale. Stand still with your weight distributed equally on both feet. The scale begins
to take measurements straight away. If the display appears continuously, the measurement has
finished.
If you step o the weighing area, the scale switches o after a few seconds.
2.3 Setting user data
To measure your body fat percentage and other physical data, you must enter your personal user para meters.
The scale has 10 memory positions in which you and other members of your family can save and recall personal
settings. Please note that the memory begins with 1.
Switch on the scale (tap the standing surface). Wait until the display shows “0.0”.
Then press “SET”. The first memory position will appear flashing on the display. Now you can enter the following
settings:
Memory position 1 to 10
Age 10 to 99 years
Body size 100 to 220 cm (3‘-03“ to 7‘-03“)
Sex
male (
), female ( )
Degree of activity 1 to 5
Modifying values: Press
or or press and hold for more rapid progress.
Confirming entries: Press the “SET” button.
After the values have been set and displayed again, “0.0” appears on the display together with the symbol for
the selected gender
/ .
Then the scale is ready for measuring. If you do not carry out a measurement, the scale switches o automati-
cally after several seconds.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beurer BF195 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beurer BF195 in the language / languages: English, German, French, Italian, Polish, Turkish, Spanish as an attachment in your email.

The manual is 3,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info