533482
9
Zoom out
Zoom in
Previous page
1/44
Next page
9
3. Information on the diagnostic scale
The measuring principle of the diagnostic scale
This scale operates according to the B.I.A. principle (bioelectric impedance analysis). This enables physi-
cal relationships to be measured within seconds by means of an undetectable, completely harmless
electric current. The body fat percentage and other physical relationships in the body can be determined
by measuring the electrical resistance (impedance), and the inclusion in a calculation of constants and in-
dividual parameters (age, height, gender, degree of activity).
Please be aware that values obtained from the diagnostic scale represent only an approximation of actual
analytical medical data.
General tips
If possible, always weigh yourself at the same time of day (preferably in the morning), after using the toi-
let, on an empty stomach and unclothed, in order to achieve comparable results.
Important for the measurement: body fat can only be measured when barefoot and with the soles of the
feet slightly moist. Completely dry soles can result in unsatisfactory measurements due to inadequate
conductivity.
Stand still during the measurement.
Wait a few hours after unaccustomed strenuous activity.
Wait approx. 15 minutes after getting up in the morning to allow the water in the body to distribute.
Limitations
When measuring body fat and other values, deviating and implausible results may occur in:
children under approx. 10 years,
competitive athletes and body builders,
pregnant women,
persons with fever, undergoing dialysis treatment or with symptoms of edema or osteoporosis,
persons taking cardiovascular medication,
persons taking vascular dilating or vascular constricting medication,
persons with considerable anatomic deviations of the legs in relation to total body size (length of the legs
considerably shortened or lengthened).
4. Operation
The scale is solarpowered. It requires sufficient light to operate. If the lighting
conditions are sufficient, a flashing sun symbol or “0.0appears in the display.
If the lighting conditions are too dark, no measurement can be taken. Place the
scale somewhere with more light.
4.1 Weight measurement
-
ment.
Step on the scale. It immediately begins to measure. Stand still with your weight distributed equally on both
legs. If the display appears continuously, the measurement has finished.
If you step off the weighing area, the scale switches off after a few seconds.
4.2 Setting user data
To measure your body fat percentage and other physical data, you must enter your personal user parame-
ters.
The scale has 10 memory positions in which you and other members of your family can save and recall
personal settings.
Switch on the scale (tap the weighing area). Wait until the display shows “0.0”.
* d = 2,5 m: 40 W 7 W
= 3,0 m: 60 W 11 W
*d
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beurer BF 300 solar at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beurer BF 300 solar in the language / languages: English, German, French, Italian, Polish, Turkish, Spanish as an attachment in your email.

The manual is 1,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Beurer BF 300 solar

Beurer BF 300 solar User Manual - Dutch - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info