715716
28
Zoom out
Zoom in
Previous page
1/120
Next page
28
b) Delete individual saved value for a user
S
elect a measured value in the measurements memory “Mem” and briefly press the [SET] button on the con-
trol unit to delete the stored value displayed.
Y
ou can also do this immediately after the measurement is taken.
U
se the [ , ] buttons to select “YES” and confirm the prompt using the [SET] button. If you do not want to
delete the value, confirm “NO” using the [SET] button.
c) Delete all stored values for a user
O
pen the measurements memory “Mem” and press the [SET] button on the control unit for around 5 seconds
to delete all values.
U
se the [ , ] buttons to select “YES” and confirm the prompt using the [SET] button. If you do not want to
delete, confirm “NO” using the [SET] button.
Changing the batteries
The control unit has a low battery indicator. The symbol appears in the display when the control unit bat-
teries are flat, and the symbol appears if the scale batteries are flat. In this case, the batteries should be
replaced. Connect the scale to the app again. The system time is updated.
NOTE:
When changing the batteries, use batteries of the same type, make and capacity.
D
o not use rechargeable batteries.
U
se batteries free from heavy metals.
13. Cleaning and maintaining the device
The device should be cleaned from time to time.
This should be done using a damp cloth and, if necessary, a small amount of detergent.
IMPORTANT
N
ever use abrasive solvents or cleaning products!
N
ever submerge the device in water!
D
o not clean the device in a dishwasher.
14. Disposal
Empty, completely flat batteries must be disposed of through specially designated collection boxes, recycling
points or electronics retailers. You are legally required to dispose of batteries.
The codes below are printed on batteries containing harmful substances:
Pb = Battery contains lead
Cd = Battery contains cadmium
Hg = Battery contains mercury
For environmental reasons, do not dispose of the device in the household waste at the end of its service life.
Dispose of the device at a suitable local collection or recycling point in your country.
Dispose of the device in accordance with EC Directive – WEEE (Waste Electrical and Electronic Equip-
ment). If you have any questions, please contact the local authorities responsible for waste disposal.
D
ispose of packaging in an environmentally friendly manner.
20
PAP
15. What if there are problems?
If the scale encounters an error during measurement, the following is displayed:
Display Cause Solution
ERROR:_OVERLOAD
Maximum weight capacity of 180 kg
exceeded.
Loads must be limited to 180 kg.
LOW_BATTERY
Batteries are nearly flat. Replace the batteries (see section 12).
MEMORY_FULL
30 measurements have been stored. Transfer the measured values.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beurer BF 105 Body Complete at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beurer BF 105 Body Complete in the language / languages: English, German, French, Italian, Polish, Turkish, Spanish as an attachment in your email.

The manual is 17,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info