651532
20
Zoom out
Zoom in
Previous page
1/98
Next page
20
Close the cuff with the hook-and-loop fastener such that the
upper edge of the device is positioned approx. 1 cm under-
neath the heel of the hand.
The cuff must be fitted tightly around the wrist, but must not
constrict.
Adopt the correct posture
Before every measurement, relax for about five minutes. Oth-
erwise deviations can occur.
You can take the measurement while
sitting or lying. To take your blood pres-
sure, make sure you are sitting comfort-
ably with your arms and back leaning
on something. Do not cross your legs.
Place your feet flat on the ground. Make
sure to rest your arm and move it. Al-
ways make sure that the cuff is at heart level. Otherwise sig-
nificant deviations can occur. Relax your arm and the palm
of your hand.
To avoid falsifying the measurement, it is important to remain
still during the measurement and not to speak.
Performing the blood pressure measurement
As described above, attach the cuff and adopt the posture in
which you want to perform the measurement.
Press the START/STOP button to start the blood pressure
monitor. All displays will illuminate brief-
ly.
The blood pressure monitor will begin the
measurement automatically after 3 sec-
onds.
The measurement is taken during the inflation phase.
You can cancel the measurement at any time by pressing
the START/STOP button .
As soon as a pulse is found, the pulse symbol is displayed.
The systolic pressure, diastolic pressure
and pulse rate measurements are dis-
played.
E
_ appears if the measurement could not
be performed properly. Observe the
chapter on error messages/troubleshooting in
these instructions for use and repeat the meas-
urement.
Now select the desired user memory by pressing the M1 or
M2 memory buttons. If you do not select a user memory,
the measurement is stored in the most recently used user
memory. The relevant symbol M1 or M2 appears in the dis-
play.
Press the START/STOP button to switch off the blood
pressure monitor. The measurement is then stored in the
selected user memory.
If you forget to turn off the device, it will switch off auto-
matically after approx. 3 minutes. In this case too, the value
is stored in the selected or most recently used user memory.
Wait at least 5 minutes before taking another
measurement.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beurer BC50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beurer BC50 in the language / languages: English, German, French, Italian, Polish, Spanish, Spanish as an attachment in your email.

The manual is 13,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Beurer BC50

Beurer BC50 User Manual - Dutch - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info