470369
15
Zoom out
Zoom in
Previous page
1/72
Next page
15
Bare your left wrist, making sure that the circulation in
the arm is not restricted by any clothes etc. that are
too tight. Position the cuff on the inside of your wrist.
Fasten the cuff with the Velcro fastening so that the
upper edge of the monitor is positioned approx. 1 cm
below the ball of your thumb.
The cuff has to be fitted tightly around the wristbut
should not constrict it.
Important: The instrument should only be operated with
the original cuff.
Correct posture
Rest for approx. 5 minutes before
each measurement. Otherwise there
may be divergences.
You can perform the measurement
either sitting or lying down. It is es-
sential to support your arm and have
it at an angle. Always make sure that
the cuff is level with your heart. Otherwise there may
be serious divergences. Relax your arm and the palms
of your hands.
In order not to distort the result, it is important to keep
still during the measurement and not talk.
Measuring blood pressure
Switch on the blood pressure monitor with the ‘
button.
Before the measurement, the last saved test result
is briefly displayed. If there is no measurement in the
memory, the instrument always displays the value ‘0’.
The cuff is pumped up to 190 mmHg. Cuff air pressure
is released slowly.
If a tendency towards high blood pressure is already
detectable, the cuff is pumped up again and cuff
pressure increased further. As soon as a heart rate is
detected, the heart rate symbol
is displayed.
Heart rate, systolic and diastolic blood pressure are
displayed.
You can adjust the volume during the announcement
by pressing + and -.
You can interrupt measurement at any time by press-
ing the ‘
’ button.
‘Er_’ appears if it has not been possible to perform the
measurement properly. Observe the section in these
instructions on error messages/troubleshooting and
repeat the measurement.
The test result is saved automatically.
Evaluating results
Cardiac arrhythmia:
This instrument can identify possible cardiac arrhythmia
disorders during measurement and if necessary indi-
cates the measurement with the flashing icon
.
This may be an indicator for arrhythmia. Arrhythmia is
a condition where the heart rhythm is abnormal as a
• • • • • • • • • •
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beurer BC 19 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beurer BC 19 in the language / languages: English, German, French, Italian, Polish, Turkish, Spanish as an attachment in your email.

The manual is 2,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info