809104
12
Zoom out
Zoom in
Previous page
1/252
Next page
CHECK LIST
To check the parts printed on the package, verify that the
equipment components represent the model that you had
intended to purchase. In case of any damaged or missing
parts at the time of purchase, visit our website
bestwaycorp.com/support.
CHOOSE THE CORRECT LOCATION
Indoor and outdoor & above ground & portable wiring &
portable spa.
Only For Spas Equipped With Wi-Fi:
To choose the correct location for the spa equipped with Wi-Fi,
read the Spa Wi-Fi instruction leaflet included in the package
and the following instructions.
For All Spas:
The surface chosen to install the pool must respect the
following technical characteristics.
• Because of the combined weight of the water inside the spa
and the users, it is extremely important that the surface
chosen to install the spa is capable of uniformly supporting
the total weight for the entire time the spa is installed.
• An adequate drainage system has to be provided to deal with
overflow water for both indoor and outdoor installations.
During filling, draining or when in use, water may flow out of
the spa.
• The surface must be flat and smooth. If the surface is
inclined or uneven, it can create an unbalanced loading on
the structure of the spa. This situation can damage the
welding point.
• The selected surface must be clear of any type of object.
Due to the weight of the water, any object under the spa
could damage or perforate the bottom of the spa.
• The selected location must not have overhead power lines or
trees. Be sure the location does not contain underground
utility pipes, lines or cables of any kind.
• The selected position must be far from the house entrance.
12
Do not position any equipment or other furniture around the
spa. The water that comes out of the spa during the use or
due to a faulty product can damage the furniture inside the
house or surrounding the pool.
• Do not to install the spa on carpet or other floor materials
(e.g. untreated cork, timber or other porous materials) that
promote or harbor moisture and bacteria, or that could be
affected by water treatment chemicals used in the spa.
• Consult your local government authority for installation
regulations.
Suggested set-up surfaces: grass, ground, concrete, and all
other surfaces that respect the above set-up conditions.
Not suggested surfaces: mud, sand, gravel, deck, balcony,
driveway, platform, soft/loose soil or other surface that does
not meet the above set-up conditions.
Indoor Installation:
Be aware of special requirements if you install the spa
indoors.
• Humidity is a natural side effect with Lay-Z-Spa installation.
Determine the effects of airborne moisture on exposed wood,
paper, etc. in the proposed location. To minimize these
effects, it is strongly recommended to provide plenty of
ventilation to the selected area. Consult an expert to
determine if more ventilation is needed.
• Keep suitable air treatment in the indoor location (ventilation
and dehumidification) regularly to preserve the bathers’
safety and comfort.
• Empty the spa before removing it from the indoor location or
building.
Outdoor Installation:
• The selected surface must be clear of aggressive plants and
weed species. Those types of strong vegetation could grow
through the liner and create water or air leakage. The grass
or other vegetation that may cause odor or slime to develop
have to be eliminated from the set-up location.
• Do not leave the spa's surface exposed to direct sunlight for
long periods of time. We recommend protecting the spa from
direct sun light exposure by a cover when not in use.
Follow the important instructions above to choose the correct
surface and location to set up your spa. Damaged parts of
the spa, due to the fact that the set-up surface and location
does not match the instructions, will not be considered as
manufacture defect and will avoid the warranty and any
service claims. It is the responsibility of the owner to ensure
the site meets the requirements at all times.
• Consult your local professional installers for environmental
conditions, such as ground water and risk of frost.
• Recommended to protecting the spa from direct sunlight
exposure by a cover when not in use.
SPA HEATER EQUIPOTENTIAL BONDING TERMINAL
• It is recommended to arrange for a qualified electrician to
connect the spa pump to an equipotential bonding terminal
using a minimum 2.5mm
2
solid copper conductor.
PRE-SETUP
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bestway 60075 Santorini at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bestway 60075 Santorini in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 3.93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info