Manual Bestway 60057 Lay-Z-Spa (page 21 of 328) (English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish, Finnish)

752527

Zoom out

Zoom in

1/328

Ambient Temperature

10ºC(50ºF)

15ºC(59ºF)

20ºC(68ºF)

25ºC(77ºF)

30ºC(86ºF)

Water Temperature

10ºC(50ºF)

15ºC(59ºF)

20ºC(68ºF)

25ºC(77ºF)

30ºC(86ºF)

Set Temperature

40ºC(104ºF)

Heating Duration

18.5h - 21.5h

15h - 18h

11.5h - 14.5h

8.5h - 11h

5.5h - 7.5h

IMPORTANT

To reach 40°C (104°F), the heating duration required is based on the starting water

temperature and ambient temperature, the data below is purely for reference. To

display the current water temperature, run the filter system for at least a minute.

Power Rate Massage Tube PowerHeat Element Power Jet Pump Power

2,000W at 20ºC

Filter Pump Power

50W 1200W

220-240V AC,

50Hz, Single Phase

2,050W at 20ºC 800W

HEATING RESET

When using the Lay-Z-Spa for first time, or after a long period of

inactivity, be sure to press the reset button on the pump using a

small and thin object.

If the temperature on the control panel (or the water temperature)

has not changed 4-5 hours after activation of the heating system,

use a thin object to press the RESET BUTTON, and restart the

heating system.

IMPORTANT: The heating system will not operate if the outside

temperature is above 40ºC (104 ºF) or if the Lay-Z-Spa is under direct sunlight.

Under these conditions, please wait until a cooler time of day before pressing the

RESET BUTTON with a thin object and restarting the heating system.

RESET

•

You can keep the spa on during winter when the temperature is lower than 6°C

(42.8°F)

The Freeze Shield™ system automatically keeps the water temperature between

6°C

(42.8°F)

and 10°C

(50°F)

, and it will prevent the water from freezing.

Important:

If the water temperature is below 6°C

(42.8°F)

, the spa heater must always

be on. In this mode, the Freeze Shield™ system can keep the internal temperature

between 6°C

(42.8°F)

and 10°C

(50°F)

to prevent damage, such as water freezing in the

pipes or the circulation system.

Important:

If the Freeze Shield™ system isn’t working, alarms will pop up on the spa.

Be sure to check the status of your spa if the outdoor temperature is below 6°C

(42.8°F)

In case of a long-term absence from home when there is a risk of temperatures falling

below 6°C

(42.8°F)

, we strongly suggest disassembling the spa and storing it following

the storage procedure.

•

Any damage as a result of using the spa in these conditions is the responsibility of the

customer. Do not use the spa when the ambient temperature reaches -10°C(14°F).

• Be sure to cover the spa with the

spa cover whenever the heating

function is activated. Leaving the

spa uncovered will increase the

heating duration required.

• When the spa is assembled with

water, do not switch off the spa

heater if the temperature is lower

than 6ºC(42.8°F).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bestway 60057 Lay-Z-Spa in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 28,83 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bestway 60057 Lay-Z-Spa Manual

Product: