809081
21
Zoom out
Zoom in
Previous page
1/356
Next page
Ambient Temperature
10ºC(50ºF)
15ºC(59ºF)
20ºC(68ºF)
25ºC(77ºF)
30ºC(86ºF)
Water Temperature
10ºC(50ºF)
15ºC(59ºF)
20ºC(68ºF)
25ºC(77ºF)
30ºC(86ºF)
Set Temperature
40ºC(104ºF)
40ºC(104ºF)
40ºC(104ºF)
40ºC(104ºF)
40ºC(104ºF)
Heating Duration
18.5 h
15 h
11.5 h
8.5 h
5.5 h
IMPORTANT
To reach 40°C (104°F), the heating duration required is based on the starting water
temperature and ambient temperature, the data below is purely for reference. To
display the current water temperature, run the filter system for at least a minute.
Power Rate Massage Tube Power Heat Element Power Water Pump Power
2,000W at 20ºC 50W
220-240V AC,
50Hz, Single Phase
2,050W at 20ºC 800W
• Be sure to cover the spa with the spa
cover whenever the heating function is
activated. Leaving the spa uncovered
will increase the heating duration
required.
• When the spa is assembled with water,
do not switch off the spa heater if the
temperature is lower than 6ºC(42.8°F).
HEATING RESET
When using the Lay-Z-SPA for first time, or after a long period of
inactivity, be sure to press the reset button on the pump using a
small and thin object. Reset
If the temperature on the control panel (or the water temperature)
has not changed 4-5 hours after activation of the heating system,
use a thin object to press the RESET BUTTON, and restart the heating system.
IMPORTANT: The heating system will not operate if the outside temperature is
above 40ºC (104 ºF) or if the Lay-Z-SPA is under direct sunlight. Under these
conditions, please wait until a cooler time of day before pressing the RESET
BUTTON with a thin object and restarting the heating system.
You can keep the spa on during winter when the temperature is lower than 6°C
(42.8°F)
.
The Freeze Shield™ system automatically keeps the water temperature between
6°C
(42.8°F)
and 10°C
(50°F)
, and it will prevent the water from freezing.
Important:
If the water temperature is below 6°C
(42.8°F)
, the spa heater must always
be on. In this mode, the Freeze Shield™ system can keep the internal temperature
between 6°C
(42.8°F)
and 10°C
(50°F)
to prevent damage, such as water freezing in the
pipes or the circulation system.
Important:
If the Freeze Shield™ system isn’t working, alarms will pop up on the spa.
Be sure to check the status of your spa if the outdoor temperature is below
6°C
(42.8°F)
. In case of a long-term absence from home when there is a risk of
temperatures falling below 6°C
(42.8°F)
, we strongly suggest disassembling the spa and
storing it following the storage procedure.
Any damage as a result of using the spa in these conditions is the responsibility of the
customer. Do not use the spa when the ambient temperature reaches -10°C(14°F).
21
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bestway 60035 Havana at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bestway 60035 Havana in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 38.87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info