752517
11
Zoom out
Zoom in
Previous page
1/276
Next page
the Lay-Z-Spa is installed is smooth, flat, level and capable of
uniformly supporting the weight for the entire time the Lay-Z-Spa
is installed (not on the carpet or other similar material). If the
Lay-Z-Spa is placed on a surface, which does not meet these
requirements, any damage caused by improper support is not
covered under the manufacturer’s warranty. It is the responsibility
of the Lay-Z-Spa owner to assure the integrity of the site at all
times.
1. Indoor Installation:
Be aware of special requirements if you install the spa
indoors.
• Humidity is a natural side effect with Lay-Z-Spa installation.
Determine the effects of airborne moisture on exposed wood,
paper, etc. in the proposed location. To minimize these effects it
is best to provide plenty of ventilation to the selected area. An
architect can help determine if more ventilation is needed.
• Consult your local government authority for installation
regulations.
• Keep suitable air treatment in the spa chamber (ventilation and
dehumidification) regularly to preserve the bathers’ safety and
comfort .
• Do not to install the spa on carpet or other floor materials (e.g.
untreated cork, timber or other porous materials) that promote
or harbour moisture and bacteria, or that could be affected by
water treatment chemicals used in the spa.
• Empty the spa before remove it from the chamber or building.
2. Outdoor Installation:
• During filling, draining or when in use, water may flow out of the
spa. Therefore the Lay-Z-Spa should be installed near a floor
drain.
• Do not leave the spa's surface exposed to direct sunlight for
long periods of time.
• Consult your local professional installers for environmental
conditions, such as ground water and risk of frost.
• Recommended to protecting the spa from direct sunlight
exposure by a cover when not in use.
11
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bestway 60013 Lay-Z-Spa at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bestway 60013 Lay-Z-Spa in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 19,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info