753148
6
Zoom out
Zoom in
Previous page
1/44
Next page
CHOOSE THE CORRECT LOCATION
NOTE: The pool must be set up on a completely flat and level surface. Please do not install the pool if the surface is
inclined or sloped.
Correct conditions to set up the pool:
• The selected location has to be capable of uniformly supporting the weight for the entire time the pool is installed,
moreover the location must be flat and must be cleared of all objects and debris including stones and twigs.
• We recommend positioning the pool away from any objects children could use to climb into the pool.
NOTE: Position the pool near an adequate drainage system to deal with overflow or to discharge the pool.
Incorrect conditions to set up the pool:
• On uneven ground the pool may collapse causing serious personal injury and/or damage to personal property and will
void the warranty and prevent any service claims.
• Sand should not be used to create a level base; the ground must be dug out if necessary.
• Directly under overhead power lines or trees. Be sure the location does not contain underground utility pipes, lines or
cables of any kind.
• Do not set up the pool on driveways, decks, platforms, gravel or asphalt surfaces. The selected location should be firm
enough to withstand the pressure of the water; mud, sand, soft / loose soil or tar are not suitable.
• Grass or other vegetation under the pool will die and may cause odors and slime to develop, therefore we recommend
removing all grass from the selected pool location.
Avoid areas prone to aggressive plant and weed species that may grow through the ground cloth or liner.
NOTE: Check with your local city council for by-laws relating to fencing,
barriers, lighting and safety requirements and
ensure you comply with all laws.
NOTE: If have a filter pump, refer to the pump’s manual for instructions.
NOTE: The ladder must match the pool size and should be used only for entering and exiting the pool. It is forbidden to
exceed the permitted payload of the ladder. Check regularly if the ladder is properly assembled.
Note: The installation drawing for the Top Rail and the T-Connector of
3.00m x 2.00m x 84cm (9'10" x 6'7" x 33")
Note: The installation drawing for the Top Rail and the T-Connector of
4.88m x 3.05m x 1.07m (16' x 10' x 42")
Note: The installation drawing for the Top Rail and the T-Connector of
4.27m x 2.50m x 1.00m (14' x 8'2" x 39.5")
A
A
F
F
F
F
CCCC
C
C
C
C
EEE
E
E
E
D
D
D
D
F
F
E
AB
ACC
BC
C
CC
F
F
E
E
E
G
G
F
F
F
F
CCCC
C
C
C
C
EEE
E
E
E
A
A
A
A
Note: The installation drawing for the Top Rail and the T-Connector of
5.49m x 2.74m x 1.22m (18' x 9' x 48")
6
Installation
1
D
CC
C
C
D
A
3
H
H
H
I
5
4
J
J
C
C
D
F
C
C
E
C
F
C
E
E
F
E
2
F
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bestway 56622 Power Steel at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bestway 56622 Power Steel in the language / languages: All languages as an attachment in your email.

The manual is 13,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info