Manual Bestron DT48C (page 25 of 40) (English, German, Dutch, French, Italian)

546711

Zoom out

Zoom in

1/40

User’s instructions

English

OPERATION - General

1. Mounting Plate

2. Down rod

3. Motor

4. Blade

5. Blade holder

6. Canopy Figure 1

MONTAGE - Installing the fan

• Be sure to hang the fan in a place where the distance between the fan blades and the floor will be

at least 2.30m.

• Mount the outlet box to the ceiling or used existing box. In order to ensure proper support, use two

wood screws, to secure the outlet box to a joist or beam. If the location you have chosen doesn’t

have a suitable support beam, install a 2”X4” brace between ceiling joists to support fan.

1. In the packaging the mounting plate is already assembled to the canopy by 4 screws. Loosen 2 screws

halfway and two screws completely and remove the mounting plate of the canopy.

2. Disconnect the yellow-green wire from the canopy.

3. Slide the rod into the canopy. Be sure the ball joint fits exactly in the recess. (See figure 2)

Figure 2

4. Remove de cotter pin out of the safety pin.

5. Lead the wires from the motor through the rod. Insert the rod in the mounting ring

and secure with the safety pin. Do not forget to put the cotter pin back into place

so that the safety pin is locked. (See figure 3)

Figure 3

Safety pin

6. Now turn the screws into the mounting ring.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bestron DT48C in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 4,03 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bestron DT48C Manual

Product: