546556

Bestron DS2200E Manual

24
Zoom out
Zoom in
Previous page
1/40
Next page
User’s instructions
24
English
CLEANING AND MAINTENANCE - Changing the dust bag
1. Change the dust bag immediately once the ‘dust bag full’ indicator
turns red, see Figure 7.
It is possible that the indicator turns red whilst the dust bag is not yet full.
If so, then the nozzle, hose or tubes may be blocked. These will then
need to be cleaned.
2. Open the cover by pulling the cover release (dust bag) upwards.
Remove the dust bag from the holder, and dispose of it in a dustbin.
3. Fit a new dust bag in the holder and press into position.
4. Close the cover, and press until it clicks into place. Figure 7
Make sure that the dust bag does not become pinched by the cover. This could damage the appliance
and/or the dust bag.
Note Dust bags for this vacuum cleaner are available from every major hardware store, with a statement
of the type number Bestron D00013/D0013S
CLEANING AND MAINTENANCE - Cleaning or replacing the motor safety filter
Clean or replace the motor safety filter at least twice a year, and more
frequently if the filter is visibly blocked.
1. Remove the plug from the wall socket.
2. Remove the hose from the vacuum cleaner.
3. Open the cover by pulling the cover release (dust bag) upwards.
Remove the dust bag, see Figure 7. Remove the motor safety filter
holder, located behind the dust bag: see Figure 8.
4. Dispose of the filter, or wash it in lukewarm water. Allow it to dry
thoroughly.
5. Return the cleaned or new filter to its holder, and fit the holder in the
appliance. Fit a dust bag. Close the cover, and press until it clicks into Figure 8
place.
• Water could penetrate into the appliance if the filter is not thoroughly dry. This could result in
(electrical) damage.
• Make sure that the dust bag does not become pinched by the cover. This could damage the
appliance and/or the dust bag.
CLEANING AND MAINTENANCE - Replacing the exhaust filter
Replace the exhaust filter at least twice a year, and more frequently if the filter is
visibly blocked.
1. Remove the plug from the wall socket.
2. Open the exhaust-filter cover by pulling on the lip on the cover. Remove the
exhaust filter from the appliance, see Figure 9.
3. Rinse the filter in lukewarm water. Allow it to dry thoroughly.
4. Return the cleaned filter to the appliance. Close the cover, and press until it
clicks into place. Figure 8
• Water could penetrate into the appliance if the filter is not thoroughly dry. This could result in
(electrical) damage.
• The cover cannot be closed if a dust bag is not fitted, or is not fitted correctly.
• Make sure that the dust bag does not become pinched between the cover and the housing. This
could damage the appliance and/or the dust bag.
TECHNICAL DETAILS
Type: DS2200E
Power consumption: 2200W max
Mains Voltage: 230V ~50Hz
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bestron DS2200E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bestron DS2200E in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 4,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info