Manual Bestron DFS45WB (page 25 of 40) (English, German, Dutch, French, Italian, Spanish)

800745

Zoom out

Zoom in

1/40

OPERATION - Ventilation

1. Set the fan on a level surface, such as a table.

2. Tilt the fan to the required angle. You can set the fan:

a. to blow horizontally or angled slightly downwards. Turn the

adjusting nut (4) a little bit loose first. Tilt the ventilator housing

and motor housing to the required angle (with a sweep of 10°).

Tighten the adjusting (4) nut again. (See figure 3)

b. to oscillate from left to right (with a sweep of 80°). Use the

oscillation button for this (2). This will ventilate much of the

room. Pull out the oscillation button (2) until you hear it click.

(See figure 4)

c. remain in the same position whilst the fan is turning. This will

ventilate one area. Press the oscillation button (2) on the motor

housing fully in.

3. Put the plug into the wall socket.

4. Switch on the fan by turning the speed switch (3)

a. Position ‘I’: the fan operates at low speed.

b. Position ‘II’: the fan operates at normal speed.

c. Position ‘III’: the fan operates at high speed.

5. Stop the fan by turning the speed dial to position ‘0’.

6. Switch off the appliance after each use and remove the plug from

the wall socket.

CLEANING AND MAINTENANCE

Over the course of time dust can accumulate between the spokes in the fan housing, and on the fan

blades. Always begin by trying to remove the dust with a brush and/or vacuum cleaner. If this does not

remove all the dust you can always dismantle the fan and clean it.

WARNING:

• Verify that the appliance is not connected to the power supply before you clean it.

• Never use corrosive or scouring cleaning agents or sharp objects (such as knives or hard brushes) to

clean the appliance.

Reassemble the fan using the procedure given under by ‘Assembling’.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bestron DFS45WB in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1.44 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bestron DFS45WB Manual

Product: