Manual Bestron DFS45S RETRO (page 23 of 40) (English, German, Dutch, French, Italian, Spanish)

546699

Zoom out

Zoom in

1/40

Instruction manual

English

MONTAGE - Assembling the fan

Figure 3

Assembling the fan

1. Fit the rear of the fan housing (with the grip) onto the motor-housing shaft, making sure that the

openings are aligned precisely with the lugs on the motor housing and that the grip is at the top. Attach

the rear of the fan housing with the four screws

2. Slide the fan blades onto the shaft, with the locking screw exactly above the slot in the shaft.

3. Use a crosshead screwdriver to tighten the fan blades’ locking screw. Verify that the fan blades are

correctly fitted to the shaft.

4. Hang the hook on the front half of the fan housing on the rear half of the fan housing.

5. Fit the attachment bolt through the hole at the bottom of the front half and rear half of the fan housing;

tighten the bolt.

6. Close the locking clamps over the rim of both halves of the fan housing.

Figure 4

Fitting the fan on the stand

7. Remove the attachment bolt and knob.

8. Loosen the knob for the tilt adjustment and the tilt-adjustment locking screw sufficiently to allow the

bracket to fit onto the stand.

9. Fit the attachment bolt through the motor support and the stand, and tighten the knob.

10. Fit the locking screw into the recess in the stand.

11. Fit the tilt-adjustment knob. The knob will fit into the deep recess in the stand.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bestron DFS45S RETRO in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 3,1 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bestron DFS45S RETRO Manual

Product: