6943
50
Zoom out
Zoom in
Previous page
1/88
Next page
Instructions for use Automatic breadmaker
DBM2007
v 040908-02

5. Insert the plug in the wall socket.
Insert the plug in the wall socket. The display will automatically show the 1st menu
and the standard time. A beep will sound each time any button is pressed.
6. Menu selection
Select a program by pressing the Menu button.
7. Selecting the quantity of dough
Press the appropriate button to select the quantity of dough (small or large).
8. Bread colour
Press this button to select the colour of the bread, or to select the faster baking
process.
9. Setting delayed start
When fresh bread is required for breakfast it is now necessary to set the delayed
start, using the procedure given in the next Section.
10. Starting the process
Start the breadmaker by pressing the Start/Stop button. The display will now show
the remaining time.
11. Program sequence
The breadmaker will now automatically work through all the steps of the program
as set before starting the appliance. Water vapour may be seen escaping from the
ventilation openings whilst the breadmaker is in operation. This is absolutely
normal.
12. End of program
At the end of the program the display will show 0:00, and a beep will be heard. The
display will then change to show the original duration of the program.
13. Keep-warm function
The keep-warm function circulates hot air through the baking section for an
additional approximately 1 hour. This is applicable to the majority of the programs.
The best results will be achieved when the baking
tin is removed within the indicated time. A beep will sound at the end of the keep-
warm period. The function can also be stopped by pressing the Start/Stop button.
14. Removing the product
Press the Start/Stop button, and remove the baking tin.
Always use oven gloves.
15. Removing the loaf from the baking tin.
Allow the loaf in the baking tin to cool for about 5 to 10 minutes, and then turn the
tin upside down to allow the loaf to drop onto a rack. The kneading blades may be
left behind in the baking tin. Fill the baking tin with warm water, leave to soak for a
while, and remove the kneading blades. However, the kneading blades will usually
remain in the loaf. Once the loaf has cooled completely remove the kneading
blades with a utensil that will no damage the non-stick layer (such as a wooden
spoon).
16. After you have finished using the breadmaker, always press the Stop button and
remove the plug from the wall socket.
BA04-008_DBM2007.book Page 48 Tuesday, September 7, 2004 1:41 PM
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bestron DBM2007 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bestron DBM2007 in the language / languages: Dutch as an attachment in your email.

The manual is 2,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info