546665
24
Zoom out
Zoom in
Previous page
1/40
Next page
Users instructions
24
English
3. Stand the vacuum cleaner upright. An attachment slot for the accessory bracket
is fitted to the back of the vacuum cleaner next to the front castor see Figure 10.
Slide the bottom of the accessory bracket into the slot. This avoids the need to
dismantle the vacuum cleaner after use; you can store the assembled appliance
and retrieve it again quickly when you need it.
Figure 10 Storing the vacuum cleaner
CLEANING AND MAINTENANCE - Cleaning
1. Clean the outer surface of all parts with a damp cloth and a cleaner suitable for plastics. Make sure no
moisture gets into the appliance.
2. Over the course of time dust and dirt can accumulate around the wheel axles, thereby preventing the
wheels from turning easily. Consequently they should be kept clean.
Never immerse the appliance, plug or power cord in water.
Never use corrosive or scouring cleaning agents or sharp objects (such as knives or hard brushes)
to clean the appliance.
CLEANING AND MAINTENANCE - Changing the dust bag
Change the dust bag immediately once the ‘dust bag full’ indicator turns red, see
Figure 11.
It is possible that the indicator turns red whilst the dust bag is not yet full. If so,
then the nozzle, hose or tubes may be blocked. These will then need to be
unblocked.
1. Open the cover by pulling the cover release (dust bag) upwards. Remove the
dust bag from the holder, and dispose of it in a dustbin.
2. Fit a new dust bag in the holder with the arrow pointing downwards, and press
into position.
3. Press the cover until it clicks into place. Figure 11 Changing the dust bag
Make sure that the dust bag does not become pinched by the cover. This could damage the appliance
and/or the dust bag.
Note Dust bags for this vacuum cleaner are available from every major hardware store, with a statement
of the type number Bestron D00016/D0016S.
CLEANING AND MAINTENANCE - Cleaning or replacing the motor safety filter
Clean or replace the motor safety filter at least twice a year, and more frequently if the filter is visibly
blocked.
1. Remove the plug from the wall socket.
2. Remove the hose from the vacuum cleaner.
3. Open the cover by pulling the cover release (dust bag) upwards.
4. Remove the dust bag, see Figure 11.
5. Remove the holder for the motor safety filter from the vacuum cleaner, see
Figure 12.
6. Pull the motor safety filter from the holder.
7. Dispose of the filter, or wash it in lukewarm water. Allow it to dry thoroughly.
8. Return the cleaned or new filter to its holder, and return the holder to the
vacuum cleaner.
9. Fit the dust receptacle back into the holder. Press the cover until it clicks into
place.
Figure 12 Removing the motor safety filter
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bestron DBB2200E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bestron DBB2200E in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 4,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info