Manual Bestron AWK2200BW (page 10 of 24) (English, German, Dutch, French, Italian, Polish, Swedish, Spanish)

800830

Zoom out

Zoom in

1/24

OPERATION

The appliance is intended only for domestic use, not for professional use.

The following description is associated with the image on page 2:

1. Unpack the device and remove all packaging parts.

2. Clean the jug kettle before using for the rst time (see ‘Cleaning and maintenance’).

Boiling water

1. Place the appliance on a at, level surface.

2. This appliance must be connected to an earthed socket.

3. Fill the jug (1) with the required quantity of water (at least 0.5 litres, and a maximum of 1.7 litres). See

water-level indicator (2). Close the lid (3) by releasing the ap on the handle.

4. Place the kettle flush on the base (7). Insert the plug in the wall socket. Push down the On/Off switch

(5). The pilot light will illuminate.

5. The kettle switches off automatically when the water has boiled. Now disconnect the kettle from the

main power supply. Always keep the lid closed when pouring the water out.

WARNING:

Be carefull you do not contact the hot water. It can cause serious burns.

Overheating safeguard

The jug kettle is fitted with an overheating safeguard. This will switch off the jug kettle if it is operated

without (sufficient) water. Allow the jug kettle to cool down for at least 10 minutes before using it again.

CLEANING AND MAINTENANCE

1. Disconnect from mains power supply and let the appliance cool down.

2. Clean the jug with a damp cloth. Never immerse the appliance in water. Never put the appliance in a

dishwasher. Make sure that the electrical connections do not become damp.

3. If the interior of the jug has become severely discoloured, then the best way to clean it is with a damp

cloth and a little washing soda. After cleaning, rinse the jug very thoroughly.

PAY ATTENTION:

• When cleaning, do not use abrasive or scouring agents or sharp objects (such as knives or hard

brushes) and do not immerse the appliance in water or any other liquid.

Descaling

Lime will be deposited on the inside depending on the hardness of the water. For this reason the appliance

must be cleaned at regular intervals.

1. Remove the plug from the wall socket, and allow the appliance to cool.

2. The jug kettle is fitted with a descaling filter. This filter must be removed for cleaning. Press the filter

(8) inward through the spout (6). The filter (8) will spring loose. You can take it out through the top

opening by turning the kettle upside down.

3. Fill the jug with a vinegar solution to the MAX level, and bring to the boil.

4. Leave the jug with the vinegar solution to stand for a couple of hours.

5. Empty the jug, fill with clean water to the MAX level, and bring to the boil. Empty the jug. Repeat this

process twice.

WARNING:

• Never use ammonia or other products to descale the appliance. These can be injurious to your health.

Use solely a vinegar solution, or special descaling agents available from retailers.

SERVICE

If an unexpected problem occurs, please visit www.bestron.com/service for assistance.

1. Jug

2. Water-level indicator

3. Lid

4. Handle

5. On/Off switch and pilot light

6. Spout

7. Base

8. Limescale filter

9. Lid release lever

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bestron AWK2200BW in the language / languages: English, German, Dutch, French, Italian, Polish, Swedish, Spanish as an attachment in your email.

The manual is 1.13 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bestron AWK2200BW Manual

Product: