546721

Bestron AOR9 Manual

19
Zoom out
Zoom in
Previous page
1/32
Next page
Instruction manual
19
English
• In order to avoid overheating, do not cover the heater.
• The oil radiator must not be located immediately below a socket-outlet.
• Do not use this oil radiator in the immediate surroundings of a bath, a shower or a swimming pool.
• This oil radiator is filled with a precise quantity of special oil. Repairs requiring opening of the oil
container are only to be made by the manufacturer or his service agent who should be contacted if
there is an oil leak. When scrapping the heater, follow the regulations concerning the disposal of
oil.
OPERATION - Installation
1. Place the oil radiator upside down.
2. Hook the U-clip at the bottom of the radiator around the
connection between the first and second fins.
3. Insert the small hook on the U-clip into one of the holes
in the wheel bracket.
4. Insert the screw thread of the U-clip through the other hole
in the wheel bracket.
5. Screw the wing nut onto the screw thread of the U-clip so
that the wheel bracket is firmly attached.
6. Repeat steps 3 to 6 for the second wheel bracket between
the last and the one from last fins.
7. Place the radiator upright on the wheels.
Figure 2
1. Wheel bracket
2. U-clip
3. Wing nut
4. Fins
OPERATION - Use
1. Place the radiator on a flat surface.
2. Set the setting dial to position ‘0’ (Off).
3. Insert the plug into the plug socket.
4. Rotate the setting dial to one of the following settings:
0 Off
I Low power
II Moderate power
III High power
5. Rotate the thermostat dial towards the MAX. mark until a click is heard and the indicator light is lit. The
oil radiator will now become warm.
6. Rotate the dial further towards the MAX. mark to adjust the temperature. The automatic temperature
control will ensure that the room remains at the set temperature.
To find the ideal thermostat setting, rotate the thermostat dial as far as possible towards the MAX.
mark. Once the room has reached a comfortable temperature, slowly rotate the dial towards the MIN.
mark until a click is heard. The heater will then turn itself off. The temperature regulator will ensure that
the room remains at the set temperature.
7. Turn off the oil radiator by rotating the setting dial to the ‘0’ setting.
CLEANING AND MAINTENANCE
1. Remove the plug from the wall socket and allow the appliance to cool.
2. Clean the exterior of the housing with a damp cloth and rub it dry with a clean cloth.
• Never immerse the appliance, plug or power cord in water.
• Never use corrosive or scouring cleaning agents or sharp objects (such as knives or hard brushes)
to clean the appliance.
2
4
1
3
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bestron AOR9 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bestron AOR9 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 2,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info